5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

Installed a FitCamx dashcam on my 2025 Tungsten today. Front and rear cams with parking mode so they activate if the truck gets hit when I am not there. Super clean and smooth install. Looks factory
 
Installed the East Coast Drivelines 1500+HP driveshaft for the TRX. The clunk is gone, and it drives like a new truck.
Hardest part was swapping over the yokes from the old u-joints to the new one.

IMG_5638.jpeg

IMG_5644.jpeg
 
Today I installed a 500 watt cb amp and a 20 watt external cb radio speaker in my center console and also tinted my head lights .
If I had that many connections going on that close to me I'd driven off the road already! WoW!!!
If it makes you happy it makes me happy! 🤪
 
Yea in Montana it's optional to value your brain. No helmets required. I personally never ride without full PPE. It's even crazier with the amount of bugs that people don't wear helmets. I guess it's how they get their protein?
 
Passed the contractors licensing exam in Visalia. Heard the biggest tree on earth (diameter) was like an hour from the testing center. Probably took more pictures of my truck than the tree. Herman did not disappoint. Takes like 45 minutes to get up this windy road up to 6500ft, which you think would suck, but between the view and the smooth ride it was really an incredible drive. Up and down.
Man sorry you had to go to Visalia...well that is based on the last time I was there was in '98 ish
 
Passed the contractors licensing exam in Visalia. Heard the biggest tree on earth (diameter) was like an hour from the testing center. Probably took more pictures of my truck than the tree. Herman did not disappoint. Takes like 45 minutes to get up this windy road up to 6500ft, which you think would suck, but between the view and the smooth ride it was really an incredible drive. Up and down.
Always loved going up to the sequoias when I was stationed in Lemoore. Spent many Friday and Saturday nights cruising Mooney Blvd in Visalia, but usually went to Fresno.
 
Installed the East Coast Drivelines 1500+HP driveshaft for the TRX. The clunk is gone, and it drives like a new truck.
Hardest part was swapping over the yokes from the old u-joints to the new one.

View attachment 201969

View attachment 201970

Sweet! Think it would add 1,500hp on the regular Hemi?
Or should I assume it would only add about half that?


I have a NOS sticker to make up the difference anyway.
 
Finally had a chance to wash it yesterday. No real detailing or wax job since the sun came out. At least it was shiny again. Overnight, the birds crapped all over it. :mad:
 
installed the BANKS PETAL MONSTER already have a Pulsar.
Sport 5 + performance mode on the pulsar now we are laying down some black stripes. the way it should have always been........i get it it's a truck but it's much more fun now.
 
installed the BANKS PETAL MONSTER already have a Pulsar.
Sport 5 + performance mode on the pulsar now we are laying down some black stripes. the way it should have always been........i get it it's a truck but it's much more fun now.
I feel the Pulsar performance mode is already touchy enough. Couldn't imaging adding more sensitivity to it with a throttle device. No issues spinning my 35x12.50s with just the Pulsar .
 
I feel the Pulsar performance mode is already touchy enough. Couldn't imaging adding more sensitivity to it with a throttle device. No issues spinning my 35x12.50s with just the Pulsar .
live a little man LOL. maybe my hemi is trash ! it's 2wd stock tires with 3.21's and just hooked up with no spin ever on dry pavement
it's not bad you can adjust the tip in on the monster 0 is full on off the rip and 3 delays the effect to about 10mph and the tip in adjustment go's from 0-10.
yes track mode is kinda overkill but in sport it just acts like my 92 c1500 did with 3.42's and a cable throttle 5.3 swap.
 
What ceramic coating did you get?

Ceramic Pro ION. 7 year warranty. It's a new and improved version of the 5 year warranty coating I had gotten done on my '21. Went to the same place to get it. My '21 still looked perfect (when washed) when I traded it in. And I did NOT really do anything to take care of it. :-\
 

Users who are viewing this thread

Back
Top