Confirm part number 68488863AA (hopefully right tail lamp/Ram box/bed light loom)

[Aidan]

Hi, could anyone please confirm if this part is correct for a 2020-2021 Laramie - for the right-hand side jumper cable to connect the Rambox/tail lamp/bed light wires?

I am currently swapping from a non-Ram box bed to a Ram box one so mine currently doesn't have it.

2021 Ram 1500 Jumper Wiring, Right 68488863AA | Mopar eStore

2021 Ram 1500 Jumper Wiring, Right 68488863AA

store.mopar.com

 

[elinventorcito]

what stage in the swapping are you? im in the same boat and I need both side jumper cable connector. my truck is 2022 1500 limited. any inf would be appreciated.

 

[Aidan]

what stage in the swapping are you? im in the same boat and I need both side jumper cable connector. my truck is 2022 1500 limited. any inf would be appreciated.

I'm finally doing this next Friday (April 25th) - had some issues with the multi-function tailgate which I resolved yesterday. Will let you know how it turns out.

These are the wiring harnesses I got for the ram boxes - both sides, the right one is longer as it goes from below the right taillight across the chassis to the main connector - left rear side on the chassis under the bed.

 

[Aidan]

what stage in the swapping are you? im in the same boat and I need both side jumper cable connector. my truck is 2022 1500 limited. any inf would be appreciated.

Swapped over and the rambox lighting/unlock doesn't work. Everything else I did is fine, looks like the previous owner or someone messed with rambox wiring coming directly out of it - had to fix connectors etc.

Will do some testing on the wiring and go from there, suspect i'll need to open it up and see if that wiring needs replacing.

 

[Aidan]

what stage in the swapping are you? im in the same boat and I need both side jumper cable connector. my truck is 2022 1500 limited. any inf would be appreciated.

I've found my main harness does not have the wires for the ramboxes. I've confirmed the boxes can be opened electrically, and traced back to the main harness - the connections aren't populated that the ramboxes need.

 

[elinventorcito]

I'm finally doing this next Friday (April 25th) - had some issues with the multi-function tailgate which I resolved yesterday. Will let you know how it turns out.

These are the wiring harnesses I got for the ram boxes - both sides, the right one is longer as it goes from below the right taillight across the chassis to the main connector - left rear side on the chassis under the bed.

I appreciate the info, thank you so much. that is all need to complete mine