YngwieL
Active Member
After leveling my truck, tried looking for some info on adjusting the headlights after putting a 2" level kit in.. couldn't find anything specific.. so I decided to go ahead, and get the measurements.. little dot on the headlight is:
42.5" from the ground
low beams were hitting at about 45" high
marked a line on the wall at 42.5" and another at 40.5"
40.5" is where you want the top edge of the headlight beam.. 41" is where I put the passenger side beam
from stock headlight position, I rotated the drivers side headlight adjustment screw 4.5 turns clockwise, and the passenger side 4 turns clockwise to get to the positions mentioned above.. hope this helps in regards to making the adjustments without all the other hassles.
side note, my truck had the off-road package, which adds an inch to all my numbers over a standard Rebel, keep that in mind.
42.5" from the ground
low beams were hitting at about 45" high
marked a line on the wall at 42.5" and another at 40.5"
40.5" is where you want the top edge of the headlight beam.. 41" is where I put the passenger side beam
from stock headlight position, I rotated the drivers side headlight adjustment screw 4.5 turns clockwise, and the passenger side 4 turns clockwise to get to the positions mentioned above.. hope this helps in regards to making the adjustments without all the other hassles.
side note, my truck had the off-road package, which adds an inch to all my numbers over a standard Rebel, keep that in mind.
Last edited: