Recent content by zstroken

What are folks doing about the front fender insulation, looking to do woolwax on the truck.

I had read about 4th gen mods for the Tcase, to engage the clutch via hardwire. Anyone selling this wiring harness that includes this modification?

This thread is awesome, I am thinking I missed some things. I have a 2023 with the 4 switches(Tow/Haul, Traction control, F and R park assist). I am wanting to go to a 6 and use them for air bags,(1 inflate and 1 deflate) Has this been successfully done, and is there some info on how to do it?

I ended up buying new, most of the salvage yards I talked to online wouldn't guarantee the color.... I figured by the time I drove somewhere to get one, just purchase a new one.

Any issues using these on a 2023 big horn? https://timbergroveenterprises.com/21up-ram-1500-trx

So I just finished the driverside (didnt buy the passenger). Used the harness from Jimmy07. Only set the AP wireless for driverside. No real issue, I probably spent more time on the harness install, than I did any other part.

Thanks for the info, I am curious how the custom tuners are doing it. They have an option where they don't have your clone, and just use a base clone.

Ok, my question is how are others flashing ECM's with only a VIN?

I don't believe there were any codes around them. Other suggestions?

Hello, I have a used ECM, that I got to mess around with. I put it in my truck and the truck will start, but immediately dies. I have use AlphOBD to program the VIN, what else am I missing?

I have the power folding standard mirrors with puddles, turn signal and heat. What part number is the equivalent tow mirror? Mine are all black FYI Or does anyone have a VIN off of a truck with power fold, heat, puddle, turn signal tow mirrors, so I can find them?

ECM?

Hello, I have a used ECM for a 2023 DT ecodisel and have programmed the VIN to the ECM via alpha OBD. Truck will start, but immediately dies. Next steps?

Did you have any issues or lack of function just doing the drivers door? Did you just change the one setting for the AP on the door you installed?

Any one done just the drivers door and left the AP setting for the passenger blank? I really onle need it for the driverside, figure it would be way easier to do this. Also anyone put a meter on the door handle and measured resistance on the wires? It says smart switch, but curious if it is...