Recent content by Scyllint

You can remove it without reversing anything. If you plan on doing more alfa obd work you can leave it in. It's sometimes a pain in the *** to remove depending on what cable you have.

"Either zip tie it up out of the way or find some kind of fasteners to mount to the factory holes. The dummy plug has a retainer clip plugged into one of the holes. I tapped 2 sheetrock anchors into the holes and screwed the antenna in with 2 sheetrock screws. Its not perfect but it is...

I have some pics of this from my install I can send over if that helps. Different parts of the door harness, taking it apart, how to insert the wires, etc. The diagram jimmy07 provided for what terminals the wires plug into was the most helpful

This and also how did you snake the wire from the handles in the frame? The wire from the handles could be taken out if the window hits it as it moves

Some vehicles are different. On my mom's Nissan you have to push the button to lock and unlock

The button is just for locking. Grab handle to unlock doors, push button to lock

Applied power to both terminals (not at the same time) on the window motor and nothing happens. Jumped power from the red wire at the door power module to the motor also and still no joy. New window motor time I guess?

Awesome thank you

Where do I apply the 12 volts for those circuits? I have an extra car battery I can wire up

Nevermind. Couldn't help myself. B2577 - no description B18BA - open circuit. Window control

Cool. Will do this tomorrow. Thank you

Tried that earlier but didn't time it, so not sure how long I left it unplugged. I'm going to pull out the door plug tomorrow and go over it again. 🤷‍♂️

I didn't find any obvious loose, disconnected, etc wires. The white plug on the door module has power at the red and black wires coming from the door. The black plug with wires going to the window motor has no power. If I push the window button they get power for a brief moment but then back to...

Passenger handle installed. Works. Locks work. Mirror works. Power window on passenger side does not work. Trying to control from driver switch does not work it either. Any ideas?

Usps is all screwed up right now, it's not just you it's everybodies stuff unfortunately