Recent content by RX9790

I know this is an old post but nothings changed lol. Updating the post for new buyers. I put the 2" RC set and UCA's on my V6 BH CC 6.4 and it lifted it 2.5 inches. I assume once I put a winch up there it will probably drop 1/4". ORP springs and 1.5" spacer in the rear.

I just went to the dealer to get my part number and it shows quantity 2 for my springs. same on both sides.

V8 parts work fine, just lift a little higher. I used RC 2" struts and went up 2.5". Wanted 3.5 but no 3" struts around.

I have the RC 2" on my V6 and it lifted it 2.5". There is only about a 200lb weight difference on the Hemi, not enough to matter. Been on there for 4k miles now. Also used the RC UCA.

I know its an old thread but just in case someone needs info, I called RC and they said its just the weight difference. The parts will bolt up. I am going to use the 2" lifted N3 struts so it might get up to 3" per the RC rep. I am doing 3" in the back so it will be fine. Plus, once a 10k winch...

Sold the jump seat locally

Should be a black plug on the floor console in the front.

Thanks

Does anyone have the pinout for the wireless charger? Truck didnt come with it but the new console has it. I noticed my large black connector has about half the wires of the consoles harness so likely just missing. Hoping i can just wire in to fuse box.

I just ddi this today. They will reach. remove the piece under the steering wheel. Unplug the ITBM on the right. Reroute the console wiring and it will barely reach of the console is almost in place. Once the console is slid in, the wires are pushed in and the ITBM can be plugged back in easily...

Massive special thanks to whomever did the 30 page writeup, it saved me hours of work. I put a 19 Laramie console in and everything but the wireless charge and cd player works. There are some differences in the 22 model (minor) if you want to update the writeup how-to. 1. The rear bracket works...

No, nothing installed yet, still making sure I have all I need. I did get a set of UCA from Maxtrac. Not sure what reverse steamroller tires are but I plan on Black Rhino Abrams rims and 33" KO2s. Factory seems to be around 32" so 33" should be fine, not going real wide or anything.

MaxTrac Leveling Kits - Dodge - RAM 1500 - MaxTrac Suspension Store None of these kits have them. This suspension is new to me and I did not research well, got too excited and got the spacers alone. I lifted my telluride and Wrangler with just spacers. No, Maxtrac never mentioned needing UCA, I...

I have a V6 gas and after buying the bypass harness, I discover no ANC to tap. 22 BH with stock 6 speakers. Where can I tap a lead for the sub?

Thanks, probably go by dealer tomorrow and price theirs.