Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Done and dusted. Re-used 2 qts and bought a new 5 qt. bottle. Dipstick has a clear line in a nice safe area. I was just over analyzing the oil running up the side because of the situation. Thanks for all of your help. Basically going to try to file this in the back of my mind as a bizarre...
Haha gotta love over analyzing the dipistick.
I would say it's almost impossible that it's low by 4 qts especially. I coulddnt tell how much I lost because its on gravel but at this point I've added 3 extra quarts so assuming I lost no oil I would be at 10 qts! I can imagine I lost all 7 qts...
Now I feel like an absolute idiot. The dipstick has oil running up the sides but not middle pretty high up, well past where the add oil indicator is. However, the hard line where the entire dipstick is covered is down below the add oil line.
I was once told that run your finger down the...
I know it seems unbelievable but I called to double check today and checked online. I also made sure the filter was the correct one. Seemed like the wrong thread size or something just wouldn't spin on correctly. New filter is Mobil 1 which is what was on it before.
You're thinking it's...
So the threading on the Napa filter was defective and when I thought it was tight I was wrong. Napa will be getting a call tomorrow.
I added 3 more qts of oil and made sure I added some to the filter so the engine would immediately get oil. Any thoughts on whether or not permanent damage was...
I'll inspect this evening after work. Thanks for the suggestions. I think regardless of whether it's the filter this is probably the last time I'm using Napa brand.
I did clean the area with a rag and recall just seeing metal no rubber gasket so definitely don't think I doubled it. There was for sure a big blowout haha...
I highly doubt cross thread because it went on easy and I hand screwed it on as usual. I guess the filter gasket might have been stuck to the old filter....
First, I promise I'm not a total newb and this is not my first oil change ever and not the first on my truck. I just changed the oil (pennzoil 5w-20 syn.) and filter (Napa Gold part no. 7060) and when I turned the truck on the engine was clicking which I understand is normal after oil change...
Despite what I've found on here I think you can actually run 17's and as far as I know AEV conversions use 17's but that might be for 2500's. I cant understand how the 2500 would have smaller calipers or rotors. You just have to mount the wheel weights differently. Guess the only issue I can...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.