Recent content by OKRam1500

Followed the instructions over here: https://5thgenrams.com/community/threads/how-to-add-adaptive-cruise-control-lane-assist-fcw-auto-hi-beam-to-ram-1500.30924/ This lists the settings you need to change in the computer for Auto High Beam. Once you make the modification to the computer, you...

Just had this same thing happen. Does anyone know where you can find the wiring diagram for the overhead console?

Here is the factory bolt part number from when I added the transmission skid plate: Bolts (x2) - 6104416AA - Size M10X1.50X35.00

The question has been asked many times to many dealers but they are not allowed to make this change to the trucks.

Here is the best way to determine if you have DASM

What error codes are you getting from the ABS module? I had a couple of error codes that wouldn’t clear. I ran the codes through the search tool on this thread and found that there was some sort of new install initialization or something that was required. After completing a few of those...

Got the steering wheel switch, HCU, and new ABS module installed. Lots of other steps later everything is working great. Thanks for all the great input and ideas.

One place I read said: For someone without the storage option from factory to install the storage also required replacing all of their seat brackets. https://5thgenrams.com/community/threads/under-seat-storage-removal.17719/#post-594176

You just need to drill two holes and install riv-nuts https://5thgenrams.com/community/threads/transmission-skid-plate-install.36847/

That is the same cable that I use. I have always unplugged the cables from the security gateway and plugged them into this cable each time I was making a change. Then you plug your reader into the port this cable created. I do put the plugs back to the original configuration when I have...

This website shows the diagram and sells/lists out all of the part numbers 1-23 (but somehow left #24 out). You may just need to visit the local dealership to get that part ordered. https://www.moparpartsoverstock.com/showAssembly.aspx?ukey_assembly=2155678&ukey_product=13930064

I ended up buying just the 68298334AA part. It comes with a new gel pack already attached to the sensor. On the installation side: I removed the old sensor, scraped the remaining old gel off the windshield, and cleaned the windshield before installing the new sensor. Installation of the...

That bypass should work. You need to unplug the 2 cables from the drivers side footwell and plug them into you bypass cable. Plug your OBD tool into the port on the bypass and you should be good to start connecting with Alfa OBD. Just be sure to backup everything before you make changes so...

The new one came with a new gel pack already attached (under the clear cover it ships with). I did make sure to scrape all of the old gel off (it stayed on the windshield when I removed the old sensor). Then I used a bit of glass cleaner to make sure everything was clean before installing the...

I read through this thread and someone mentioned that their might be a way to calibrate the rain sensor.