Recent content by Mike 67

I decided to go with the PedalMax setup for my 5.7 non-Etq. What is the best price out there for one? I'm not in a hurry. If I have to wait for a holiday to save I will. Thanks

Yep, I know lowering the speed would help. Just didn't want to hold up the rest of the guys caravanning in our group. The tires I'm running are large tires and have a speed rating of 81mph. Not worried about a blow out. Never had one in the 10+ years owning this trailer. The trip home...

My 5.7 non etorque only got 6.5 mpg pulling a 3,700 lb enclosed v nose trailer! I would get just about double with my old 07 Duramax. Disappointed!

I knew my '19 Ram with the 5.7 (non etorque) and 3.21 gears would deliver worse mpg compared to my old 07 GMC Duramax. But holy cow, I just got 6.5 mpg pulling my enclosed v nose trailer! The trailer with snowmobiles only weigh about 3,700 lbs. I would normally get 11-12ish mpg with my...

2015 Honda Stateline.

Could we make a sticky with all the Mopar part numbers needed (using the generic black mirrors like the kit sold by infotainment)? Checked out the available mirrors and was amazing how many options there are. What was frustrating was some of the part numbers didn't show the correct pic of the...

Removed the 3rd brake light and found what looks like a dried rusty drip. Hoping that is where the water came in. I applied some dielectric grease around the gasket and also replaced the plastic washers for rubber ones under the 4 screws that hold the light assy on. While the light was off I...

Thanks Whiskey_tango. I did see that thread. Mine isn't cracked though. Must be the mold lines that others mentioned.

Recently picked up a '19 Bighorn with just under 4k miles. Going over everything I found evidence of a water leak above the rear window. Also looks like there is a small stain on the headliner. I sealed the 3rd brake light and replaced the plastic washers on those screws with rubber washers. I...

Like many others I need folding mirrors and currently have the tow mirrors (without heat). Going to swap them out and use a vin with the power fold and heat option for the genie programmer. Would having a vin from a truck with the BSM option give me that fuctionality as well?

Just picked up a '19 Bighorn with about 4K miles. Being abit ocd I spent a lot of time rolling around under it to get extra paint on areas to protect from rust. While under there I found one of the body mount bolts not seated correctly. Can this cause a problem?

You don't want to change the angle of the damper. Saw an FCA service bulletin that stated to never change the angle as they are designed to work at a certain position.