Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Mines not leaking but I do live in the hi desert so not too many opportunities for it to leak. To be honest when I first saw it I thought the same thing. Need to call them and see if my truck is done. We will see.
Adam Stephens
Im having the same issue, in exactly the same spot. Dropped it off at dealer thwy said looks like someone tried to break in then I showed them all the photos of everyone elses warping in exactly the same spot....so they are looking into it.
No second battery I just use marine breakers instead of fuses as they are way more simple to deal with if you ever need to work on the system and are usually easier to mount cleanly. In this case a perfect spot right in front of the battery. Power is run down drivers side. The factory wire...
Im using a helix dsp.2 not a rockford, and running the fronts full active no passive crossovers. Will know more on chimes etc tomorrow as Im just getting ready to test. Im assuming no issues since Im running high level so should see any "sounds" fine. The factory drivers in the dash are...
Well no luck on the pac v2 in my ecodiesel, just hi leveled in to feed the helix dsp. A picture of progress finally stopped raining so got all the wire run just need to hook everything up and tune away. As you can see its almost like the truck was designed for two helix hxa 500s.
Running boards so the wife can get in the truck, dynaudios in the doors, was hoping to get the amps in but my PAC AP4-CH41 is defective and not fully talking to the headunit.
Anyone had any issues with the PAC AP4-CH41 on no amplified non anc system? Installed mine today did the sleep cycles, and it isnt recognizing the can bus data for the volume knob. It flickers when changing source etc so it is recognizing can data there nonflicker for volume. Ran through some...
Some more pics, front doors and tweeter mounts. Tweeter mounts are custom made, i used a router table to copy the factory dash speaker profile. For dyns had to use 1/8 abs 1/4 made the tweeter hit the grill.
They are dynaudio esotan 272. The adaptors are steve meade designs 6x9 to 6.5 1/4 abs plates. Cool thing is they are predrilled to the same bolt pattern as the dyns. Screw arrangement, after some minor trimming of factory tabs on speaker hole, is a bit wierd. You cam get one factory screw...
Despite all odds I got to pick mine up yesterday, Ram truck center in Lancaster, CA is working with a skeleton crew but still managed to make it happen. Mine took about 3 weeks from KZ to pickup.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.