Recent content by mattee

I believe by changing the cofig 3 setting you could now lock your key fob in the truck. I think that setting is what prevents that from happening. Again the horn beeps and unlock means the truck thinks the key fob is inside the vehicle, that is one of the settings that should have already been...

Apologies, I thought it was just a problem with the tailgate since you mentioned the rear antenna part numbers. I don't think the rear antenna wouldn't have any effect on the doors since you can just do the doors, that is all done through the RF hub already in the truck and if you choose not to...

I used the cheaper antenna as well and have had no problems, about a year and a half now. There are different connectors for the 19-21 trucks for the rear harness. Maybe double check that you have the right pin location maybe

I could be wrong but I believe the only way to do it is with Tazer. There is no factory setting for it and I have alpha OBD and I don’t think that will do it. I think it has to be a live setting that Tazer can do because it stays plugged in all the time. Also I would actually advise against it...

Do you mean auto folding mirrors when you put it in park?

I’ve used Timken and SKF in the past on multiple vehicles and both had good results

My driver side mirror heats up very slowly compared to the passenger side as well. I park beside my house and I didn't notice this until now because I used to back in because my daughter parked in front of me which puts my driver side next to the house and it usually didn't get covered in frost...

So I’ll say this quick, I didn’t order the door handles from Bam, it was another vendor. I just was referencing that you can’t go by vin when adding features that weren’t done at the factory.

I ran into the same issue last year when I added passive entry and ordered the new door handles but luckily i caught it before they shipped it and got the correct part ordered. Did you ever get this working? I just tried it omn my truck with the same part number alredy in the truck. I know Jimmy...

Joe dirt for president😂😂😂

Same with me.

So I did do a restart on my way home from work today and got the same result as before. When it loads I get the home screen that jumps up and down. Shut the truck off and let it sit while I got my hair cut and then everything was fine when I started it again. Don't know what's going on but they...

I did the update as well, did not try to restart the radio but mine shows the software version as before the update. Nwo that being said it did say it was a uconnect box update so I don't know if that's different from a software update.

No optin for not loading the update, the only choices you have when the pop up appears is update now or schedule for later🤷‍♂️

I agree, I have been dealing with the dreaded Uconnect box error message since day one with my truck and I too am now out of warranty (as of February of this year). I called customer care about it when it started again and they told me I need to go to a dealer for a TBM2 and antenna firmware...