Recent content by JP305R

Guys if I have a stock set up 2021 bighorn and get new wheels with a -12 offset and leave everything else the same is this had for the truck or is new suspension required? It fits without any issues and has no rubbing or anything

Well you can make it fit very easily. Just need 1/4inch mdf for the doors. And the 3.5 for the dash a small cut on the screw tabs with tin snips or Klein’s

Heads up I was able to get the JL c2-650x and c2-350x to fit easily in both the dash and doors. Also I can confirm when paired with the kicker key 3.5 in the dash sound 10x better then tweeters in the dash.

I was told numerous times by crutchfield that JL C2-650X and JLC2-350x won’t fit the front doors and dash corners I can confirm they do with plenty of clearance. Just need a 1/4 MDF spacer for doors. For the dash speakers the mounting tabs need to be slightly trimmed around the metal edges where...

Awesome! We got a similar set up. I got 2 JL Audio 10w3v3 in a NetAudio dual upfiring box, front 4 speaker kicker key with kicker ksc speakers tweeter in dash snd 6x9 in front back speaker is off factory. I really want to try the c2-690TX in the front snd am willing to use a dremel to make it...

Sweet you use tweeters in the dash or 3.5? Have you tried both?

Anyone know how to install the JL Audio c2-690tx 6x9 speakers in the 5th gen front door is anything special required?

Hey dude thank you so much for the response. it’s the DT 5th gen V6 with 8.4 unconnected doesn’t have a ANC non alpine basic 6 speaker system. I also I connected the kisload and amp about 6inches after the quick connect that goes right into the factory radio since my system doesn’t have an ANC I...

so i installed the kicker key 180.4 and got it to work i had to add the KISLOAD2 in bi-amp mode with the detect radio feature on the AMP on for the speakers to play. However everytime i turn off the truck they dont work and i need to remove the radio fuse for them to work everytime any ideas...

hey guys i installed a kicker key in my ram 2020 1500 with the KISLOAD2. i installed it in bi-amp mode. i got it to work but everytime i turn off the truck and get back in i need to remove the fuse that powers the radio and re-insert it for the speakers i amped to work again. anyone with...

Just did my first oil change in my life thx to this thread. Thx OP! anyone know which is the correct Fumoto magnetic Oil drain plug to get for the v6?

So I bought the RAM 1500 2020 V6 penastar 8.4 screen basic speaker package. This truck doesn’t have an ANC. I already replaced all speakers and added a custom built sub box in the back. Everything sounds great. Now I want to amp the dash and front door speakers with the kicker key. Besides a...

yes i have the 4 mics.

anyone able to find the ANC in the v6 basic??? i looked under the steering wheel and driver seat with no luck and i have the 4 speakers from the ANC on the roof....and help is appreciated