5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
JDHarris's latest activity
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.Yes, I recalibrated my speedo for 37’s and adjusted the TPMS threshold down to 45 PSI. I bought the MDP+ from the mopartsp.com website... -
JDHarris replied to the thread How To Use AlfaOBD On 2025+.I’m just following up here. The Mopar MDP+ successfully proxi aligned my truck, including the 4 modules that were consistently not...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.The Cardaq 3 has been stable and responsive, but I do have the 4 modules that don’t respond to proxi alignment. I can connect to the 4...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.This is the behavior I saw when I was missing the correct VC++ redistributable. After addressing that, I was able to get fully into...
-
JDHarris replied to the thread SGW 2025 Ram 1500 Big Horn.That’s the behavior I saw when I was using an OBD splitter. I’m still struggling to get the proxi alignment to work for anything other...
-
JDHarris replied to the thread SGW 2025 Ram 1500 Big Horn.I have the Rlink X7, Rlink J2534, and the Cardaq 3. I believe I used the green j2534 with WiTech when I did the TPMS change. The Cardaq...
-
JDHarris replied to the thread SGW 2025 Ram 1500 Big Horn.WiTech was the only thing I was able to change the TPMS settings on. In “Misc Functions” there was a setting to change the “tire...
-
JDHarris replied to the thread SGW 2025 Ram 1500 Big Horn.I have a TOPDON j2534 and X7. WiTech2 has worked with both of them, though I did have some challenges. The biggest challenge was that...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.Correct. The Rlink devices, or other supported J2534 device, can be used with WiTech2 to unlock the SGW and perform some actions. For...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.Has anybody successfully calibrated the tire size/speedo on a ‘25+? I’ve been beating my head against this for a few days now without...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.Thanks for the suggestions. I’ll try them out. I did change tire circumference. I tried reverting the 3 changes (tire diameter and...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.I was able to do the PROXI alignment using a Cardaq VCI. For whatever reason the RLink devices would get stuck at various points. Now...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.Thank you for the information. That all makes sense with what I was seeing. I have nothing aftermarket that touches the CAN bus. Only...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.I was following the directions (I thought?) on the first page of this thread that said you need to use Anyscan to unlock the security...
-
JDHarris replied to the thread How To Use AlfaOBD On 2025+.It's starting to look like either the Rlink devices don't like the splitter, or I have a bad one. If I plug either the RLink X7 or the...