Recent content by g_svan

I don't see the point. If a Fumoto valve had fixed the filter problem, sure, but the swaybar is no biggie (y)

Easy peasy. Used a empty plastic bottle to cut a funnel for the drain plug problem, and used a plastic bag for the filter problem (and a few zip ties to lock them in place). Left a few drops on the swaybar, due to bad funnel engineering, but that's about it. Similar procedure as to the old RAM...

Agreedx2 - Sound isn't half bad, but definitely not loud enough.

You'll have plenty of holes :( Here's a pic of them laminated over: //g_svan

R A M has clips and pins as well as mounting tape. //g_svan

No, I did not. I'm sure I would have broken a bunch of clips if I had ;) //g_svan

Pics as promised :D In the shade or at night it looks almost black... //g_svan

My links differ as well - approx 10mm I'd say, and it doesn't worry me (y) //g_svan

I sure will ;)

Good to know, thanks. Looking at the possibility of breaking clips/scratching the paint, we might just cut around, since only +6.5' people will ever see it :) //g_svan

Ahh, that's what I was afraid of... Saw some text on eBay about only certified technicians should do the job - that kind of text spooked me... Worst case, I'll buy a new center piece ;) Thanks, g_svan

No color, a design pattern. It's from one of the fabrics my company makes. I'll post a picture when it's done ;) (U have a mockup preview in my avatar) //g_svan

That's what I figured. I'll give it a go, thanks. I'm hoping there's no glue... //g_svan

I'm about to wrap my entire truck, and will be removing all emblems and air vents. I've done emblems before, but plastic air vents I have not. I'd like to reuse the air vents, so don't want to break them... Anyone know how this is done? Thanks in advance ;) //g_svan

You should be fine - as long as there's no crazy et on the rims... I run 295/65/20 on 20/9" et +18 and ~2" leveling kit. I only had minor rubb, which I fixed with heat gun and wet towel ;) //g_svan