Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
So I finished the install today. The rear passenger door lock is triggered by a violet wire with a gray stripe it’s thin. if that wire is connected to ground, the truck thinks the door is open so I used a normally Closed alarm garage door contact.
Connected the violet wire, with a gray stripe...
The circled portion is where I’m intercepting the wires, at the door plug. Unfortunately this wire diagram doesn't give the correct wire colors, but gives me the overall concept that it grounds the lock. so, with a voltmeter I can test what wires give continuity to ground when locked. (or at...
I have the MX4 from backflip. The magnetic sensor is on the back left-hand corner. I am attempting to set up the alarm so that if the truck bed cover is open, the alarm goes off. I haven’t incorporated it into the tailgate, but that locks when the doors are locked. I could add an additional...
Hello, wanted to know if anybody might have a wiring diagram or a pin out for the wires that enter the back driver side door. I wanted to tap into the existing wiring with the least amount of modification possible. I plan to connect to the wiring where the factory door plug connects to the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.