Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have a 2024 Laramie w/ all those features. I first bought the switch and did the programming just out of curiosity - as expected and this post has stated - I needed to replace ABS/HCU. It's not all that difficult. Bite the bullet and order the parts....
EDIT - PROBLEMS FIXED. LEAVING POST UP B/C IT MAY HELP OTHERS!!!
2024 Laramie.
I have both the modules installed and have bled the brakes manually as well as the AlfaOBD bleed. Brakes feel great.
I can't get the ABS to initialize per the directions.
I'll get the red start button to...
I received the new ABS module and HCU valve body today.
The HCU has a matching part # to what I ordered.
The ABS module does not - which I understand is normal. The original unit on the truck doesn't either.
My question - is there any physical way to verify I received the correct ABS module...
I have a recently aquired 2024 Ram Laramie w/ Full Speed FCW+, Advanced Brake Assist, Ready-Alert Braking, Laramie Level 1.
Bought the ACC steering wheel component 68309592AD and installed it.
Just for the heck of it - went thru the settings in AlfaOBD (using the Google Drive document) on...
I'm on my 2nd Ram lease and haven't had the luxury of ordering a truck built to spec. I'm also in FL where car dealers are particularly devious - so I'm better off buying from dealer inventory in a friendlier state. I tried both in 21 and 24 to find one equipped with the tow package -...
I don't have my trailer close to verify the install - but everything is swapped over from the 2021 to the 2024 with the new receiver part #. I have the option to program the tires in the 12" screen and no errors. Thanks again - great thread.
I have the receiver from my 2021 part # 68375990AC...
Thanks @Jimmy07 . When I removed the harness you made - unfortunately several of the wires came out w/o the pin attached. What is the part # to order new pins to crimp onto your harness? Will order at same time as the receiver.
The same truck w/ 3.92 gear ratio is over 11K lbs. No change in the frame. It can handle it. Other than the fuel economy the occasional times I tow 10K lbs the truck handles it great. I do find the Timber Grove air bags greatly improve the balance/setup better than a WD hitch (I've been...
I have the Timber Grove "air spring assist" airbags in my 2021 1500 BH. They are great. I just got a 2024 and will be moving these over.
https://timbergroveenterprises.com/2019-ram-1500
I tow roughly 10K lbs a couple times a year and use the airbags to level the truck. Tracks straight and...
3 years later...about to turn in my leased 21 (4x4, Hemi ET, Crew, 5'7", 3.92, Big Horn). Replaced with a leased 2024 (4x4, Hemi ET, Crew, 5'7" 3.92, Laramie AND 33 gallon).
Does anyone know if the parts are the same to add trailer TPMS? Would like to save a few $$ and swap the modules over...
Actually, I was never talking about the Comma mount. I asked if the Comma camera overrides the DASM camera - which has been answered as NO.
My hope was the Comma camera would take over for the DASM camera. If so the placement of the DASM might not be critical or possibly it would just need...
I have the parking sensors that slam on the brakes if too close - any chance that my ABS/HCU are the correct parts? I do NOT have the DASM. 2021 Ram Bighorn eTorque Hemi.
The MOUNT is glued to the windshield not the DASM. That's what I said I could fab up - which wouldn't be difficult. My entire ? was about what camera Comma uses - that has been answered so my idea won't work.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.