Recent content by Brazen LTD

Any rubbing with 325’s on the 4”?

I believe the 325’s are 35.4x12.8”

Which offset did you end up using? any rubbing issues or trimming required with the 325’s? I am so keen to follow your lead on this setup, so many conflicting fitment stories on here though!

Are you able to report back on how it went? Any rubbing with this setup?? Did you go with -19 offset?

So I am looking at getting the 5” RC lift and want to use Ridge grappler 325/60r20 on 20x10 -18 Fuel wheels. The 325’s aren’t readily available here in Australia so I may either have to use 35x12.5 or go to the 35x13.5. Can anyone verify if a 35x13.5 on a 20x10 wheel would fit?? The 325’s...

+1

Any chance of seeing those pics with it installed?? The more the merrier!

This might help if you haven’t seen already, he gives alot of info on his thoughts about the RC on air suspension;

Can you elaborate re Jack mode? I thought you could set the vehicle in Jack mode via the Uconnect settings anytime? This is the first ive heard about any issues there. Also, what size wheel/tire combo do you have and what height setting is the RAM in that image??

Can anyone confirm if you can run 325/60R20 BFG KO2’s with the BDS 4” kit on a 2020/21 Limited w/Air ride without rubbing issues? I see that Utemachine ran them with the RC lift, wondering if any rubbing with the BDS kit....

+[emoji3516] to add to the list. 2015 then 2019 SRT 6.4L. Now have a deposit on a Diamond black 2021 Limited night edition (fully optioned).

Just from the pics I’d guess they’re a 35x12.5 tire on a 20x10 wheel, but I could be wrong.

The figures might say that, but boots on the ground and there is no decline in sight! Houses are all going for Auction and selling for up to 300,000 more than asking price! Back to the point of my story though, I would jump on a $90k TRX in a heartbeat....

100% AUD. We get absolutely bent over on everything here. The cost of removing all of our manufacturing to overseas and importing everything. The RAMs come in as LHD and are converted in what was the old Walkinshaw (HSV) factory and sold on to us from there. I asked the dealer why they...

I read somewhere in here and believe (happy to be corrected if I’m wrong!) the redesigned knuckle in the RC & BDS air ride kits helps maintain alignment so the UCA’s aren’t required. Makes sense that all the components are included in the kit for the cost, otherwise it is essentially most of a...