Recent content by AllAmer1719

I swapped my injector and it went away. I couldve changed and prob got the same result. I had P0302. Im at 125k miles.

Nothing worse than being 7 hours away from home with little tools and time constraints. Fortunately was able to make back home. Felt engine running rough and made it down the street about a mile before CEL came on. Always keep code reader in truck if anyone or myself need. Latched code P0302...

If consumers continue to pay these prices, then we understand why that price them this high. To each is their own. I just cant get on board with a 70k truck. This new engine is what intrigues me the most. That is prob why i would buy one if I was willing. My 2020 BH is paid off and will...

I will do a write up, as im so tired now! HA

I just finished today. I used Timken Bearings. I purchased the kit from Rockauto. As it is late here now, I will post the individual part numbers. They all can be found at Autozone, as I cross referenced the part numbers, if need in a pinch.

It doesnt change when turning. doesnt change pitch or go away. It starts slow and as i go faster; it gets louder. Then as I decelerate you can hear it easier as less road noise.

Appreciate it. A friend down the road has a lift. I had given that thought. I figure I’d have more vibration if the Ujoints were acting up. It is coming from rear end. Mechanic will check out the axle shafts and bearing when he opens it up. I already had opened it up and found residual, but...

Well, I have accepted something must be wrong with the pinion bearing. The inner takes most of the load so that is my guess. Could be more than one. Next week local trans and diff shop is going to replace all four bearings. Told him to let me see the bearings when he removes. Out the door for...

Well, that didnt fix it. I'm trying everything i can to not tear into the differential.

I found today that mine isn’t look healthy. I’m going with an aftermarket bearing. I am hearing a whine noise that I originally thought was a wheel or diff bearing.

Open your fill plug. If it’s not coming out it’s too low. I’ll be opening mine up here after May 4 weekend. Im going to change pinion and carrier bearings. Part of me says go ahead and do wheel why I have it open. I should see the culprit(s).

Wish I had checked mine sooner. I’m having rear end noises and when I checked; less than 2 quarts. 3.21 Gear, 2020 1500 117k miles.

Well I think time has come that I replace my rear diff bearings. I’m at 117k miles and getting a whine noise. Replaced fluid as well. You end up doing the same?

Interesting. I’m at 115k miles and sounds like mine is gone now. 2020 3.21.

Seems like a pinion/carrier bearing. Might as well replace all 4. I will see which is the culprit here soon when I tear it down.