5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

A-TEAM's latest activity

  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    Well the new can arrived and I blew thru the inlet side and air flowed right thru with very little resistance. So make sure to check...
    • IMG_9476.jpeg
  • A-TEAM
    A-TEAM replied to the thread Hellwig Sway bar Help.
    I run a hellwig solid adjustable swaybar and core 4x4 endlinks on the tightest swaybar setting and it is night and day improvement over...
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    Ive been running it 3.5 years about 45k miles. Live in Michigan with 4 seasons. Had a very long, very wet and very cold winter this year...
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    So Mishimoto got a hold of me and said they are sending an entire new can with new filter under warranty, I just had to pay shipping...
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    Thank you sir for the useful information.
  • A-TEAM
    A-TEAM reacted to Scram1500's post in the thread Oil catch can with Like Like.
    It's called a sintered brass filter, they come in various shapes and sizes
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    Just got off the phone with mishimoto and they told me that the filter part is 50 microns, does require occasional cleaning service, and...
  • A-TEAM
    A-TEAM replied to the thread 180 degree thermostat.
    Without the 180 my hemi would run around 203-212, unless I was towing then it would get to 220-225 at times. Way to hot for my liking...
  • A-TEAM
    A-TEAM replied to the thread 180 degree thermostat.
    Finally got some hotter weather and temps are where I want them to be. Stilk have to test pulling the camper, that is coming up and I...
    • IMG_9338.jpeg
  • A-TEAM
    A-TEAM replied to the thread 180 degree thermostat.
    Got out some of the shutters, had to remove the trim to get to them. Accidentally took out the middle one on the drivers side which is...
    • IMG_9327.jpeg
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    Its been solid for years too, pretty much caught the same amount and same texture of goo. This is a recent development after a brutal...
    • IMG_9326.jpeg
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    Just narrowband with the Diablo Trinity, im just going off real word results here. Clogged line > poor inconsistent idle indicating...
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    If there is only one way in and out the pressure has to equalize to atmosphere somehow, if air is being pushed out, then its getting...
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    Since you didn't bother to answer my question, ill answer it for you. The replacement air is coming in thru the same tube that it is...
  • A-TEAM
    A-TEAM replied to the thread Oil catch can.
    Lets keep the discussion focused on PVC system because passive systems are completely different in design and function and don't apply...
Back
Top