Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
For everyone following along. Per Hamesie suggestion I emailed [email protected] and within 15 minutes they responded with the correct part number. For those with 2019-2020 Ram 1500 with the red/black trim, the part number for the Front Seat Cushion, Right (Passanger) is part #...
Yeah it’s been very difficult to locate the part number because of the lack of color/description. I called 3 dealers and while all found the part number using my VIN, non of them would give me the part number due to “policy” because they don’t want customers to get the part number and take their...
Thanks. Your link and part number is for the left seat cushion cover (driver side). The color and fabric is correct, but I need the part number for the right seat cushion cover (passenger side). The left and right are different. Do you know the right side seat cushion cover?
Yeah as my post says just need the cover not anything else. I have the parts catalogue but because there are multiple seat cushion part numbers associated with the truck year and model, I don’t know what part to order. The pictures associated with those part numbers don’t show the color of the...
Looking for help locating the part number for the “Front Seat Cushion Cover, Right” (passenger side) for a 2020 Rebel. I found the part number the Front Seat Cushion Cover, Left part # 6RE39LR5AE, but having difficulty locating with the right side. These are the black and red vinyl/cloth seat...
I did because I cleaned the throttle body. When I reinstalled it I torqued them all in a crisscross pattern. The manifold is plastic so you have to be careful over tightening the screws and shouldn’t use thread locker for metal. Also the screws are completely coating in some type of green paint...
Agreed. Was really surprised to find 2 of 4 screws not just loose but backed out and the throttle body as loose as it was. Hopefully this solved the issue.
Vehicle: 2019 Ram 1500 Rebel Crew 4x4
Millage: 67,xxx
Issue: Shift to P Then Desired Gear and cold high idle and rough transmission down shifting after cold start.
Vehicle has a 5yr/75K MOPAR Vehicle Protection plan so is heading into the dealer for the Shift to P Then Desired Gear issue next...
2019 Ram 1500 Rebel Crew 4x4 with 67,xxx is also experiencing the “Shift to P then Desired Gear” issue. The issue began about 2 years ago at 36k miles. The OE battery died in June 2022 and was replaced with a new OE battery. The Shift to P issue continues with the new battery.
The Shift to P...
Yeah my waterproof tape was just a quick solution but I agree with you that there will be a next time. I’m going to research some quick and inexpensive solutions to fabricate a small damn/gutter directly above the RF Module so when water does again intrude it hopefully doesn’t fry the module...
The RF Module sits below the rear operable slider, slightly offset to the passenger side. Given propensity for leaks, IMO not a well designed place by MOPAR. See attached picture, RF Module is circled in red.
An update to my original post.
My truck had two distinct leaks. One from a poorly designed 3rd brake light gasket and the other from two separate cracks in the rear window frame. The cracks were in an area (left and right top corners) that could not be seen until the window was removed. The OE...
I was able to speak to a Ram Care specialist. My case has been escalated and was told I will hear from them in 1-2 business days. Thank you for your follow up.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.