Rear alignment

[wallyuwl]

Recently got an alignment. 2020 Laramie, see sig.

Was told the rear axle can't be aligned, only a thrust value that can be read but can't be adjusted. It was 0.15 deg. I took it back for the front (steering wheel wasn't centered) and while there to look at the rear again. This time it was 0.46 but they said they didn't do anything.

Are these readings ok? What would make it go from 0.15 to 0.46 in a week (user error with the alignment maxhine?)?

 

[msnyder1112]

Rear isn’t adjustable. Post your alignment sheet. It’s probably ok.

 

[Vika]

Not adjustable for rear

 

[Scram1500]

Recently got an alignment. 2020 Laramie, see sig.

Was told the rear axle can't be aligned, only a thrust value that can be read but can't be adjusted. It was 0.15 deg. I took it back for the front (steering wheel wasn't centered) and while there to look at the rear again. This time it was 0.46 but they said they didn't do anything.

Are these readings ok? What would make it go from 0.15 to 0.46 in a week (user error with the alignment maxhine?)?

Trailing arm bushings might be worn

 

[HSKR R/T]

It can be adjustable if you buy aftermarket control arms and panhard bar.

 

[kapinallinen2]

It can be adjustable if you buy aftermarket control arms and panhard bar..

What would one adjust on a solid axle?
The assend either follows the front or skew to the left or the right?

 

[HSKR R/T]

What would one adjust on a solid axle?
The assend either follows the front or skew to the left or the right?

Centering left to right . Forward and and backward in wheel well, and pinion angle.