Fender Flares or not? *Update Flares and Spacers Installed*

[kapinallinen2]

Looks tasteful unlike some other aftermarket setups I have seen.

 

[wacopolumbo]

Looks tasteful unlike some other aftermarket setups I have seen.

Thank you. I waaaaaay over analyzed the options.

 

[MadMikeee]

Looks awesome! Great job!

 

[wacopolumbo]

Looks awesome! Great job!

Thank you!

 

[RAMTEXAS]

Well, I appreciate all the input. I have finished the install. I went with the Paint Matched SF1 flares and BORA 1.75” spacers up front and 2” in the back. I’m sorry about the dirt, it’s been raining here for 2 days. I’m super happy with how it came out.

View attachment 205853View attachment 205854View attachment 205855View attachment 205856View attachment 205857View attachment 205858View attachment 205859

did you install the fenders flares yourself? if so how was the fitment?

 

[RAM REAPER MAN]

Well, I appreciate all the input. I have finished the install. I went with the Paint Matched SF1 flares and BORA 1.75” spacers up front and 2” in the back. I’m sorry about the dirt, it’s been raining here for 2 days. I’m super happy with how it came out.

View attachment 205853View attachment 205854View attachment 205855View attachment 205856View attachment 205857View attachment 205858View attachment 205859

What grille is that? It's the best looking one I've seen...

 

[Tjpitchell]

I HATED since Day 1 that my '24 Laramie didn't have OEM fender flares..but got used to it..until I picked the Fuel Variant wheel that has a +1mm offset, and picked a 285/60R20 to go with it..which would have meant a +0.91" poke that I would have hated also, so fender flares became an issue again. Also, I have 6mm Bora spacers in back.

I bought OEM flares and had them painted. I cut the "pins" off the clips and used 3M tape..but the ~10 liner screws are what really hold them on.

I love the look of the flares with the more aggressive looking ATs, and now the poke is only 0.16"

View attachment 205459View attachment 205460View attachment 205461View attachment 205462

Where did you get your flares. I like the look of them

 

[Ready Go]

Where did you get your flares. I like the look of them

They are Original OEM Mopar/Ram Fender Flares that I bought from BAM Wholesale out of Ohio. Roughly $450-500 with all four spats that are specific to the fender flares.
Here's the part numbers for the fender flares...



This is a place that sells the OEM FFs color matched to your truck for ~$1100...

https://www.paintedoemparts.com/product-page/painted-2019-2025-dodge-ram-1500-fender-flare-kit-4-genuine-oem?utm_source=google&utm_medium=wix_google_feed&utm_campaign=freelistings&gad_source=1&gad_campaignid=20040403614&gclid=CjwKCAiA3fnJBhAgEiwAyqmY5bxwy7UIc7vvgBocXAAkOImOn8HTI21t4IgCUd_lwzCNBL7hVa4onhoCxUQQAvD_BwE

 

[RAM REAPER MAN]

View attachment 209530

They are Original OEM Mopar/Ram Fender Flares that I bought from BAM Wholesale out of Ohio. Roughly $450-500 with all four spats that are specific to the fender flares.
Here's the part numbers for the fender flares...
View attachment 209528


This is a place that sells the OEM FFs color matched to your truck for ~$1100...
View attachment 209529

https://www.paintedoemparts.com/product-page/painted-2019-2025-dodge-ram-1500-fender-flare-kit-4-genuine-oem?utm_source=google&utm_medium=wix_google_feed&utm_campaign=freelistings&gad_source=1&gad_campaignid=20040403614&gclid=CjwKCAiA3fnJBhAgEiwAyqmY5bxwy7UIc7vvgBocXAAkOImOn8HTI21t4IgCUd_lwzCNBL7hVa4onhoCxUQQAvD_BwE

WoW! Im surprised people aren't stealing them. Maybe I should put some locking or security screws on mine They do look good

 

[RAM REAPER MAN]

Where did you get your flares. I like the look of them

I just ran across these looking for something else. This would be a lot cheaper unless the price of paint has gone crazy
$150 unpainted FENDER FLARE