directionals not working warning in cluster

[Shmannion13]

So yesterday while driving light came on the dash showing me all four corners of my directional is not working upon further review. I found that my front driver side headlight also not working, but then goes on when I turn on the left directional and stays illuminated for about 10 seconds before shutting back off. None of the corner directional are working. The directions in the mirror are working and the back driver side blinks, but it’s so dim I don’t know what to do or where to start from what I’ve read. It’s not a fuse. I’m thinking maybe the switch if it’s something easier I’d like to do it myself instead of bringing it through the dealer.

 

[Shmannion13]

 

[stevj]

Might have lost a ground.
Check all the connections and wire condition at the affected light modules at all four corners.
If you're handy with a meter, probe for proper ground at all the lights.

Steve

 

[kapinallinen2]

If there is a short or open in the circuitry it should store a code.
With multiple failures like that it does sound like a connection problem.

 

[Shmannion13]

• https://5thgenrams.com/community/th...d-problem-with-turn-signals.67162/post-902639
• Add bookmark
• #3

Well, I brought mine to the dealer and they said that I have a leak in the front corner panel that is leaking in the cab on the body control module and the other wiring harnesses that because it’s water damage it’s not covered under my eight year 125,000 extended warranty even though I said this truck is a pavement pusher And this is not from something I did recklessly I didn’t drive through a puddle. This is strictly a manufacturing defect so I’m currently dealing with corporate, but it seems to be slow moving.

 

[Shmannion13]

• Anyone experienced problem with turn signals
• Add bookmark
• #3

Well, I brought mine to the dealer and they said that I have a leak in the front corner panel that is leaking in the cab on the body control module and the other wiring harnesses that because it’s water damage it’s not covered under my eight year 125,000 extended warranty even though I said this truck is a pavement pusher And this is not from something I did recklessly I didn’t drive through a puddle. This is strictly a manufacturing defect so I’m currently dealing with corporate, but it seems to be slow moving.

He told me I have to go through insurance and have my insurance company pay for or pay for it out-of-pocket

 

[Shmannion13]

• Anyone experienced problem with turn signals
• Add bookmark
• #3

Well, I brought mine to the dealer and they said that I have a leak in the front corner panel that is leaking in the cab on the body control module and the other wiring harnesses that because it’s water damage it’s not covered under my eight year 125,000 extended warranty even though I said this truck is a pavement pusher And this is not from something I did recklessly I didn’t drive through a puddle. This is strictly a manufacturing defect so I’m currently dealing with corporate, but it seems to be slow moving.

He told me I have to go through insurance and have my insurance company pay for or pay for it out of pocket. I just don’t get how that’s acceptable. The truck is only five years old and they obviously this isn’t the only leaking problem. They have the third brake light back window problem also like this is obviously a major problem with this truck overall and it is obviously a quality control issue.