5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Drivers side tailpipe hanger replacement
- Thread starter Bearsworld
- Start date
Trooper4
Ram Guru
- Joined
- Feb 14, 2019
- Messages
- 1,824
- Reaction score
- 2,087
- Points
- 113
- Age
- 76
- Location
- KITTITAS, Washington
Did mine on both sides. Not that bad. Release the wiring harness clips, and a socket (the dreaded 10mm I think) with extension does the job. The hardest part is getting the old rubber off the broken bracket unless you get a new one. Then with a little soap it goes on the new bracket pretty easy. The bracket is made so that when you raise the exhaust assembly up, and rotate the bracket forward you can get the rubber on, and then get it bolted back up. Takes a little cussing, but it's not terribly hard.
