Ramboxes

[dforaker79]

Hello,

This is my first post. I just bought a gorgeous 2020 RAM longhorn and have been fixing minor things here and there. My drivers side Rambox button did not work and I chased it down to it being a wiring or button problem. I bought an an entire new lid from Mopar for about 90 bucks. Pretty good deal actually as it came with the actuator and all of the wiring. I went to put it on today and and the painted panel seems impossible to remove to swap to the new lid. It unscrews on the bottom, but the top has clips with seemly no way to undo them. Has anyone removed a Rambox applique body panel?

 

[Darksteel165]

I havnt but this is what I see.
Says 5 push clips removed with trim tool from the top after screws removed.

 

[dforaker79]

Thankyou, I guess I don't have the correct trim tool. I tries a thin putty knife to get in there. Didnt work.

 

[Darksteel165]

Thankyou, I guess I don't have the correct trim tool. I tries a thin putty knife to get in there. Didnt work.

Typically you use these hard plastic trim sticks. Various thicknesses but should be able to wedge it in there and pray like a crow bar, or push it deeper in to make it pop out.

 

[Ellisstrong]

I havnt but this is what I see.
Says 5 push clips removed with trim tool from the top after screws removed.
View attachment 176618

This is good info as I feel like a couple of my clips aren’t hooked or something on that fascia