What did you do to your Ram today???

[ferraiolo1]

Wanted to add that hidden light bar but I read that it’s a pain to install so I never did it

Start to finish was 2hrs including running wires into the cab

Even with mine being lowered I was able to slide under the front without jacking, and I’m not skinny


Sent from my iPhone using Tapatalk

 

[ramButz]

Why do you have two sets of floor mats? One on top of the other. I'd be worried that my gas pedal would get hung up on that second mat.

you are right!..i had them left over from my old vehicle(Avalanche).they are high quality and heavy duty.so what do i do with them now.might as well put them to use. after all these years theyre still holding up,,be sides no one will see them but me and now you

 

[ramButz]

Especially when it looks like the factory all weather mats are underneath. And there was a recall on the older Mopar mats for the gas pedal getting caught in them.

yes i got the new updated ones. as for the extra mats ..no one will know but me,,,,and now you

 

[ferraiolo1]

Why use one rubber when you can use two?


Sent from my iPhone using Tapatalk

 

[Eighty]

Why use one rubber when you can use two?


Sent from my iPhone using Tapatalk

Because then you can barely feel the floor and it takes all the fun out of the activity in question

 

[HemiDude]

 

[User_67930]

Got her all prettied up today.

 

[Trykonkid11]

How hard was it to take the chrome ones off? I would like to replace my black out ones for chrome. Have any plans for the ones you took off?

They were super easy to come off, I took a plastic scraper got under the double sided tape and just kept working it back and forth until it was all the way through.
Some use the fishing line trick, I did that when I debadged the truck. The angle for these emblems was weird, I kept breaking the line.
The ones I have are all cleaned up, just have to add new molding tape. If you are interested in mine, PM me we can probably work something out.


Sent from my iPhone using Tapatalk

 

[Tinman 454]

Got a new foam gun and some chemical guys products very happy

 

[MurphBigHorn]

Bath time.

 

[arod412]

Installed my rough country 20" light bar.

For some reason the lower grill on the big horn doesn't come in 2 pieces ( my 2021 rebel was similar and was two pieces) so I can remove the back plate to make it see through.

Anyway $50 later and I painted it to match my truck. It came out very nice.

2022 Ram Big Horn Back Country
2016 Dodge Charger scat pack
2021 Jeep Wrangler Unlimited Sahara

 

[MontFla]

I put the rough country rear wheel well liners on. There is a bumper sticker that says “don’t worry my truck uses enough gas for it and your hybrid

 

[MoreOvalteenPlz]

Installed the OEM matte black running boards (Part # 82215301AC)

 

[OKRam1500]

One new sensor and lots of time playing with Alfa ODB:
Replaced the humidity sensor with one that also does rain sense for the windshield wipers
Programmed rain sense wipers, auto dimming brights, off-road pages, fog light dropout, and modified the setting on my heated seats and steering wheel.

 

[TNRamGuy]

One new sensor and lots of time playing with Alfa ODB:
Replaced the humidity sensor with one that also does rain sense for the windshield wipers
Programmed rain sense wipers, auto dimming brights, off-road pages, fog light dropout, and modified the setting on my heated seats and steering wheel.

What can you modify on the heated seat and steering wheel?

 

[MoreOvalteenPlz]

What can you modify on the heated seat and steering wheel?

You can add high-medium-low settings for the steering wheel and change the steering wheel material type so it doesn't get blazingly hot on the high setting. You can also change the seat material type so they don't get uncomfortably hot.

 

[OKRam1500]

What can you modify on the heated seat and steering wheel?

On heated seats you can change the material of the seat (Leather, Cloth, Perforated).

On heated steering wheel you can change the material (leather or leather wood) and add more levels of heating (3).

AlfaOBD Known Changes 5th Gen

I saw this being mentioned in the AlfaOBD thread that it would be nice to have a comprehensive list in one thread of known changes that are known to work, so I figured I would kick it off and add what I know and update to the first 3 posts that I will reserve for future submissions. I come on...

5thgenrams.com

 

[Nels]

Installed the OEM matte black running boards (Part # 82215301AC)

I went with the same but gloss. Kinda wish I had done mat because the gloss show so many water spots after washing. Other than that I really like them. Simplest install ever.

 

[Nels]

I went with the same but gloss. Kinda wish I had done mat because the gloss show so many water spots after washing. Other than that I really like them. Simplest install ever.

Matte.

 

[Raminit]

Today I put my new 3D printed front split on. Side spoiler is ready to painted, also someone I have 3D printed myself. What do you think?
View attachment 125020
View attachment 125021

That’s bad ***!!
So sporty!!
I was thinking of something similar, like a cap of sort to make the front bumper appear lower for more a Mack truck look.
Well done!