Camber

[MurphBigHorn]

Was looking at the truck today. Thinking of adding wheel spacers. Noticed cambers off on front driver side compared to passenger front and rear of the truck at least visually. Rest of the truck is about 1inch away from flush with the fenders. And driver side is 1/2 out from fender. Do these trucks have any adjustments with out getting camber kits?

It’s going to dealer Monday for steering wheel clicking. Maybe have to check the alinement.

 

[Richard320]

Yes, there is a Camber adjustment. But it will only move the lower control arm in or out to get the tire angle correct. It won't move the upper control arm at all, so the tire may still stick out.

https://5thgenrams.com/community/attachments/02-front-suspension_wheel-alignment_standard-procedure-alignment-pdf.99494/

 

[MurphBigHorn]

Yes, there is a Camber adjustment. But it will only move the lower control arm in or out to get the tire angle correct. It won't move the upper control arm at all, so the tire may still stick out.

https://5thgenrams.com/community/attachments/02-front-suspension_wheel-alignment_standard-procedure-alignment-pdf.99494/

Thank you. I see that you mean. Kinda stinks. If I add the wheel spacers. This wheel will look funny.

 

[mikeru82]

Were you parked on a perfectly flat level surface? That can affect how the truck appears to be sitting in relation to the body.

 

[MurphBigHorn]

Were you parked on a perfectly flat level surface? That can affect how the truck appears to be sitting in relation to the body.

Unfortunately yes pretty flat


Sent from my iPhone using Tapatalk