New KO2s for my Rebel

[ReLLIK75]

Going on end of this week along with the Revel/Daystar lift and level kit. Changing out Nitto Ridge 305x55 to 35x12.5 on Fuel Rebel 20s.

 

[MarvsAMartian]

Damn dude. That's an upgrade.

 

[ReLLIK75]

And the finished product. Had a little rubbing so a couple of zip ties took care of the issue. This photo was taken with the Revel links at the recommended starting 2.5" size. Yesterday I adjusted the links by 6 turns which raised the front a bit more and really leveled it out.

 

[WXman]

So you have a front level kit and nothing else? Got any pics of the front clearance with the tires turned?

 

[ReLLIK75]

Correct. Just the Daystar pucks and the Revel links. Here’s a few pics that show the clearance. It’s pretty close but doesn’t rub with the wheel well liner zip tied back.

 

[Neurobit]

Correct. Just the Daystar pucks and the Revel links. Here’s a few pics that show the clearance. It’s pretty close but doesn’t rub with the wheel well liner zip tied back.

Looks fantastic.

 

[stalkerish]

Looks Awesome! I have pretty much the same truck and wheels. Looking to go from my Toyo MTs 305/65/18 to some skinny 35s in KO2s. Thanks for the visual.

 

[Truckguy]

did you go to the KO2 because you were unhappy with the nitto’s?

 

[ReLLIK75]

did you go to the KO2 because you were unhappy with the nitto’s?

I loved the way they looked and I think they performed pretty well off road, but I also do a lot of snow driving and had been seeing numerous posts that snow performance was not that great. I actually put the nittos on earlier this year, but missed my opportunity to drive them in the snow. I already knew that they didn't grip well in the rain (from personal experience). I decided I wanted a good AT tire that performed equally well in the snow. Plus the fact that I was able to buy these from Amazon for $320 per tire vs the normal $360 made the K02s a no brainer.