2019 Ram 1500 Limited w/air ride 37 inch tire

[Gmash]

Has anyone successfully installed 37" tires on a 2019 Ram 1500 Limited w/air ride suspension with the RC 5" lift? I believe they will fit, but not sure how much they will rub. Any information would be helpful. Thanks.

 

[Jordan3206]

Has anyone successfully installed 37" tires on a 2019 Ram 1500 Limited w/air ride suspension with the RC 5" lift? I believe they will fit, but not sure how much they will rub. Any information would be helpful. Thanks.

Theres a guy with a level and 37s on a rebel. It will fit as long as your offset isnt crazy. 0--18 should be fine.

 

[Gmash]

Thanks for the response. So probably the recommended -5.5 would be ok.

 

[Fatboy]

Has anyone successfully installed 37" tires on a 2019 Ram 1500 Limited w/air ride suspension with the RC 5" lift? I believe they will fit, but not sure how much they will rub. Any information would be helpful. Thanks.

37s will fit only if it’s stock wheel or stock specs of your OEM 22s, with that you will need a 1/4 inch spacer.

 

[Gmash]

I don't have the 22 inch wheels. I would also be purchasing a wheel and tire package.

 

[Diddy Sanchez]

Has anyone successfully installed 37" tires on a 2019 Ram 1500 Limited w/air ride suspension with the RC 5" lift? I believe they will fit, but not sure how much they will rub. Any information would be helpful. Thanks.

Hey, this reply might be a little late to the party, but I have this exact set up. Started with 35s and they just looked too damn small. I went with the toyo atII in a 37x12.5 and it fit perfectly with minor trimming, nothing a sharp pair of scissors can’t handle. Not much of a difference in performance jumping from the 35 to the 37 with the 3.92s.

 

[PorBoy]

^^^. Is this paired with a 6” lift ?

 

[Diddy Sanchez]

^^^. Is this paired with a 6” lift ?

5in lift w/air ride

 

[PorBoy]

^^^. Thank you kindly for responding back with this.

 

[TXECOD]

5in lift w/air ride

I'm about to install the BDS air ride lit on my 2020 Limited. Are you able to clear the 37's in all modes? What setting was the truck in your pics?

 

[Utemachine]

I just had the 5” RC installed on my 2020 w/ air ride and I’m running 325/60r20’s (35.5x13) on a 10” wheel. To me it’s the perfect look. 35’s looked a touch small and I didn’t want to run 37’s. I’ve had to do more trimming than the sticky posted here. I just finished my third round of shaping and trimming and hopefully got it. I tested at the parking garage at my office yesterday. I have about 3/4” before I hit. I did test it in entry exit mode and it rubs pretty bad.

 

[Utemachine]

5in lift w/air ride

Looks great! What kind of MPG are you getting?

 

[Diddy Sanchez]

Looks great! What kind of MPG are you getting?

Around 15-17mpg....not bad for 37’s

 

[Utemachine]

Around 15-17mpg....not bad for 37’s

That’s better than I’m getting!

 

[Diddy Sanchez]

That’s better than I’m getting!

Im getting better MPG on my limited with 37's then i was on my rebel with 35's, game gear ratio on both.

 

[4XPEDITION]

Do you feel that the 1500 with 3.92 gearing is fine with 37s? I am thinking about running 37s with a 4-5" lift. I am concerned about the gearing. Any comments would be helpful.

 

[Diddy Sanchez]

Do you feel that the 1500 with 3.92 gearing is fine with 37s? I am thinking about running 37s with a 4-5" lift. I am concerned about the gearing. Any comments would be helpful.

The 3.92s are just enough to move the 37s without feeling a ton of loss. Really not a huge difference between when I had 35s...I’d say go for it

 

[Neurobit]

I just had the 5” RC installed on my 2020 w/ air ride and I’m running 325/60r20’s (35.5x13) on a 10” wheel. To me it’s the perfect look. 35’s looked a touch small and I didn’t want to run 37’s. I’ve had to do more trimming than the sticky posted here. I just finished my third round of shaping and trimming and hopefully got it. I tested at the parking garage at my office yesterday. I have about 3/4” before I hit. I did test it in entry exit mode and it rubs pretty bad.

Would love to see pics of the actual truck.
Cheers,

 

[4XPEDITION]

I just had the 5” RC installed on my 2020 w/ air ride and I’m running 325/60r20’s (35.5x13) on a 10” wheel. To me it’s the perfect look. 35’s looked a touch small and I didn’t want to run 37’s. I’ve had to do more trimming than the sticky posted here. I just finished my third round of shaping and trimming and hopefully got it. I tested at the parking garage at my office yesterday. I have about 3/4” before I hit. I did test it in entry exit mode and it rubs pretty bad.

I would like to see a side view of it, also...

 

[Marvindanebethea]

Hey, this reply might be a little late to the party, but I have this exact set up. Started with 35s and they just looked too damn small. I went with the toyo atII in a 37x12.5 and it fit perfectly with minor trimming, nothing a sharp pair of scissors can’t handle. Not much of a difference in performance jumping from the 35 to the 37 with the 3.92s.

You my friend are a savior of lives.