Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Those are 20x9 wheels with a positive 19mm offset. This is the standard offset for all the RAM 20x9s that I've seen, so if you see anyone else running the factory wheels with your tire and lift setup, it would be the same for you.
I would add that Readylift says 295/65-20x9 +18 offset fits our trucks with that lift. 295/65-20s work out to 35.1x11.6 inches. Seems like your setup would work.
You’ll be fine. 12.50’s won’t work but 11.50’s will
What about 285/65R20’s? Found a better price on those.
Those are 34.6x11.2. Even smaller than what ReadyLift says will work.
better price probable because smaller tire. You’ll be fine
Yeah that’s true! Ordered some Nitto Ridge Grapplers.
Looks good!
Nice looking truck! Could you measure from the center of the wheel to the fender in the front?
Nice !!!!
When I have a little free time I’ll measure it. I didn’t measure before the lift so I don’t have that one.
I imagine you could without a problem. I went narrower for weight also. Saved close to 50 pounds going narrow between the two tires I was looking at.
Did the larger tires throw off the speedometer reading?
so mine was off for like 10-20 miles but auto corrected itself. I read somewhere in the forum that the UCONNECT with navigation automatically corrects itself. I was going to ODC flasher but havent had the need to now.
I will find a link but I am certain it was in the 5th gen forum
