What did you do to your Ram today???

[z0n3]

Did it come with those locking collars, or did you add them?

The 7883 model came with the upgraded end links and those collars.

 

[Joecool1983]

Installed Mopar Ramair intake and Mopar exhaust with 5" tips. All pretty east, but definitely would've been easier with a lift!

 

[DonsRam19]

Changed out my cabin air filter my old one was really dirty. Made a install video

 

[Joeyp]

Plastidipped my front tow hooks red.....

PIA to remove them?

 

[TH3JUICEMAN]

Hope they don’t rub lol

 

[Joecool1983]

Installed Mopar Ramair intake and Mopar exhaust with 5" tips. All pretty east, but definitely would've been easier with a lift!

 

[5thGenRebel_AMK]

PIA to remove them?

can be. just loosen the bolts (two bolts on each tow hook), dont take them all the way out. then you push the tow hook from the front of the truck towards the rear. They will pop out. The bolts were really tight from the factory. gunna need an impact gun or a bar with lots of leverage.

 

[ramButz]

install bed extender

103-1575 hosted at ImgBB

Image 103-1575 hosted in ImgBB

ibb.co

 

[BeauxXL1200]

Detailed the interior, including a nice wipe down with leather conditioner.

 

[BeauxXL1200]

Hellwig Sway Bar - I like
View attachment 53274

Thinking about installing the Hellwig. I don’t anticipate towing very often, but I’ve heard it makes the truck a bit more stable in turns. The ride is already great and I wouldn’t want to do anything to change that. Can you give us your thoughts on how it’s affected your ride? Thanks.

 

[Joeyp]

Thinking about installing the Hellwig. I don’t anticipate towing very often, but I’ve heard it makes the truck a bit more stable in turns. The ride is already great and I wouldn’t want to do anything to change that. Can you give us your thoughts on how it’s affected your ride? Thanks.

The sway bar is awesome except the bushings are squeaky - I ended up using the end links from my BDS kit insead of the supplied ones.... I need to find some bad *** grease...other than that it makes a huge difference- Im on the middle setting.

 

[Dookie]

Just installed mine and no squeaks at all. I pregreased the bar and the bushings preinstall with the grease that comes with it. I have used this ----> https://www.amazon.com/Energy-Suspension-9-11104-FORMULA-PRELUBE/dp/B000MW5SJ4 in the past with success. It's the same stuff the Hellwig comes with. Superlube works as well, it just doesn't last as long.

 

[Dookie]

Thinking about installing the Hellwig. I don’t anticipate towing very often, but I’ve heard it makes the truck a bit more stable in turns. The ride is already great and I wouldn’t want to do anything to change that. Can you give us your thoughts on how it’s affected your ride? Thanks.

Buy it, it is an upgrade to your stock suspension and will ride better than stock. I have mine in the firmest setting. If I had to describe the feel, is it made the suspension feel heavier?!?! Hard to explain. You have to experience it.

 

[Joeyp]

Just installed mine and no squeaks at all. I pregreased the bar and the bushings preinstall with the grease that comes with it. I have used this ----> https://www.amazon.com/Energy-Suspension-9-11104-FORMULA-PRELUBE/dp/B000MW5SJ4 in the past with success. It's the same stuff the Hellwig comes with. Superlube works as well, it just doesn't last as long.

Thanks...I did grease the crap out of it and lasted about a month...Maybe this time will be better!

 

[Dookie]

I'll keep an ear out on mine then, just installed last week, thanks. That grease is super sticky, wear gloves when handling it, and if you don't WD40 or similar will break it up off your hands.

 

[Joeyp]

I'll keep an ear out on mine then, just installed last week, thanks. That grease is super sticky, wear gloves when handling it, and if you don't WD40 or similar will break it up off your hands.

I heard they are notorious for that....oh well...It was def needed with my lift.

 

[Snwjnky]

Still happy with the ride. Even happier with the ride in corners and quick maneuvers. Feels more planted with less rocking side to side.
I have a heavy truck, so I started on the middle setting.

 

[Diamondback]

Decided to print out the templates I made last fall for the RAMBOXes and use some old cardboard on one of my cutters to see how far off they were.
I remember taking photos and importing them into my CAD program. I got so busy and noticed that the other member had started selling these, so I kinda gave up at the time. I find myself wanting them, so I am going to go ahead and finish my set since I have more time due to the days off I get here and there. 2-days-in + 2-days-off, I never know what day it is. Today feels like Sunday to me and I know it is Monday ('cuz my PC said so)

Blade was dull, so I'll have to replace it before completing the rears.
Just need to skew one 1/8"-1/4" on one side and re-add a bit I cut off on the other side.



bad sunlight on this one

 

[Jayturk]

Installed 2” leveling kit and put 33/12.50R20 ridge grapplers on. The 20x12 wheels were off my old truck and had 285/50 420’s. Rode around for awhile with those but they were useless off road. View attachment 53293 View attachment 53295 View attachment 53296 View attachment 53298 View attachment 53299

That's a good looking truck, lose the Alabama plate and "Roll Tide" and it will be a great looking truck. Geaux Tigers!

 

[Jayturk]

Changed out my cabin air filter my old one was really dirty. Made a install video

What's the interval on those?