Rebel Wheel Spacers

[Chippy]

I can confirm the 1.5" front and 2" rear spacers fit with factory wheels with no modifications on front and rear.
I can also state I had researched regarding having the rear wider than the front, I hate the look of the rear being narrower and can report that I find the truck to be more stable on the road now as I found it to be a little twichy stock.
No pic yet as truck to dirty to photo but I can follow up. Fronts are now flush with fender and rears have slight sidewall bulge poke only. I feel truck now looks properly stanced.

 

[Hooligan]

Looking forward to those photos....

 

[ortvk]

ohhhhhh yessssss in for the pics!

 

[DonsRam19]

Need the pics! What spacers do you got? Can you put a link?

 

[Ellisstrong]

I can confirm the 1. 5" ftont and 2" rear spacers fit with factory wheels with no modifications on front and rear.
I can also state I had researched regarding having the rear wider than the front, I hate the look of the rear being narrower and can report that I find the truck to be more stable on the road now as I found it to be a little twichy stock.
No pic yet as truck to dirty to photo but I can follow up. Fronts are now flush with fender and rears have slight sidewall bulge poke only. I feel truck now looks properly stanced.

Any pics?

 

[Chippy]

Dirty pics lol. Clean at mountains stock. Dirty today 20 below with spacers. These are not name brand but local shop gets them China made looked very solid and they been selling them from this factory for years without any issues.

 

[Chippy]

 

[SilverSurfer15]

 

[Hooligan]

Very nice stance. Love the all black as well.

 

[Chippy]

Thx for the compliments. There is a guy who put 2” on the front and same on the rear which looked good in his video but different model. Anyway his video with his 2” front spacers looked like the same amount of poke I have now with the 1.5” I put on the front. I think 2” would rub a lot as mine in normal ride height just skin the factory splash guard at full lock. Also I don’t think I would want any more poke on the fronts.

 

[robe2388]

Thx for the compliments. There is a guy who put 2” on the front and same on the rear which looked good in his video but different model. Anyway his video with his 2” front spacers looked like the same amount of poke I have now with the 1.5” I put on the front. I think 2” would rub a lot as mine in normal ride height just skin the factory splash guard at full lock. Also I don’t think I would want any more poke on the fronts.

I was just going to ask you this, I read somewhere putting 2" all around with a hub centric US made brand. You think that will stick out too much in the front? I just want to make my Rebel flush with the flares all around.

 

[Chippy]

IMHO 2" will poke way to much but each to there own.

 

[SacRebel]

I’m ready to buy 1.5” spacers but unsure of brand. I’ve heard of Bora and that’s about it. Any other brands to consider? And what’s the bolt pattern I’m looking for?

 

[Chippy]

If your not worried about cost I would just get the Bora

 

[SacRebel]

Will I need to do any trimming of the studs if I add 1.5" Bora spacers to my stock Rebel (front and back)? Also, any issues with rubbing?

 

[Chippy]

My pics show with 2" on rear. I rub very slightly on full lock on fronts 1.5" I have mud guards. Without them it would not rub

 

[SacRebel]

My pics show with 2" on rear. I rub very slightly on full lock on fronts 1.5" I have mud guards. Without them it would not rub

Did you have to grind down the studs on the fronts?

 

[Chippy]

Nope

 

[DonsRam19]

Nope

Can you post a link to the spacers

 

[SacRebel]

Thanks Jake, I ordered those. They’re about $80 less than Bora and I see no difference in the materials used.