Wire Harness behind HU.

[Spunky9198]

I am looking to add an amp behind the HU to power aftermarket 6x9's. Can anyone confirm if this is the correct pin-out for the stereo harness behind the HU.

https://cdn.shopify.com/s/files/1/1161/2102/files/Vehicle_Connector_Pin_Out.pdf?3294944065929771334

I used this layout in my 2017 ram but just want to make sure its still the same in the 2021. Any help would be greatly appreciated.

 

[saylor]

depending on wht you are working with you may just want/need the anc bypass harness

 

[Spunky9198]

I don't have the ANC I just have the v6 sorry I should have specified that.

Sent from my LM-G820 using Tapatalk

 

[Neurobit]

I don't have the ANC I just have the v6 sorry I should have specified that.

Sent from my LM-G820 using Tapatalk

Pls update your signature with truck vitals to avoid confusion in the future.

Thanks,

 

[Spunky9198]

Having issues tapping in behind the HU. All wires are tapped in correctly according to the 52pin harness I referenced. I was assuming the Screen had the amp built in for the radio. I am getting what I would call a ground out cancellation for the sound. If this is not correct location for the amp can anyone help me locate the stock amp for the radio.