Hopefully someone can help. I have a 2023 rebel with the 5.7 etorque. I have the rain sensing wipers. I was driving home in the rain today and noticed my wipers running g a little sluggish. I then turned the wiper knob to the high position and my wipers have literally stopped in the middle of my windshield. I have disabled the rain sensing option and still no movement. Switched the fuse and still no movement. I've read that some 2022 models have had faulty motors. Wondering if anyone here has had similar issues or can help in anyway. I just can't believe it would be a the wiper motor. I currently have 1000 miles on the truck.
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Windshield wipers stopped working
- Thread starter Tyowen
- Start date
ImEngineer
Active Member
- Joined
- Nov 22, 2022
- Messages
- 29
- Reaction score
- 18
- Points
- 3
- Age
- 28
That is unfortunate. I can't help you other than just recommending you take it back to the dealer and have them fix it. Hopefully they give you a loner while they work on it.
Darksteel165
Legendary member
If you keep turning the knob there is a low and high past where the rain sensing settings are, you can also hit the washer fluid button, if neither of them work someone electrical went or the motor blew.
You can trigger the wipers via the odb2 port with a SWG bypass and Alfaobd if you really wanted to confirm it's the motor and not the handle on the steering wheel, but if it stopped in the middle sounds like it is.
Sounds like a warranty visit to the dealership in the near future for you.
You can trigger the wipers via the odb2 port with a SWG bypass and Alfaobd if you really wanted to confirm it's the motor and not the handle on the steering wheel, but if it stopped in the middle sounds like it is.
Sounds like a warranty visit to the dealership in the near future for you.
