What’s up everybody, new to the Ram side of things. I’m a Chevy guy but i bought the wife a new Ram. Trying to figure out what leveling kit will actually level it out as close as possible? Is it a 2” or 2.5”? Going to run 33s and 20s, planning on doing Motofab up front as I’ve ran them before on two trucks prior and they were solid. Please any info would be huge. Thanks!
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What leveling kit size?
- Thread starter Jwal23
- Start date
TNRamGuy
Ram Guru
Best bet is to measure your truck, either ground to center of fender or center of wheel to fender. These trucks are all a little different based on options, suspension, cab and bed length. Leaving the back about a half inch higher looks about right IMO
Idahoktm
Spends too much time on here
The 2.5" kit will get you closer to level but you run the risk of it looking a little nose high. I have a 2" kit and I have 1/2" of rake but it looks pretty level to me. I don't like the Carolina squat look, so I'm happy with 1/2" of rake.
Oh I measured it alright lol little more than 2” difference but not quite 2.5”. My 2020 Chevy is exactly 2.5” as was my 2016. Rams just configured all weird haha
Truck looks good my man! What size tire/wheel you running? And yeah the measurements are weird, it’s over 2” but not quite 2.5”. Kinda annoying but is what it is.
Idahoktm
Spends too much time on here
Thanks. My specs are in my signature.
Gotcha.
