5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What is this trailer camera connection?
- Thread starter Schulz081
- Start date
No adapter
Digital Tow Mode camera.
It's displayed on the DRVM.
The 12-pin is trailer surround/Aux2(analog) and displays on the UC screen.
It's displayed on the DRVM.
The 12-pin is trailer surround/Aux2(analog) and displays on the UC screen.
Ramboy13
Ram Guru
I'm pretty sure at this point, both of those ports are totally useless for the 2025.
I believe the newest Trailer Surround (4-camera) kit works, but the Digital Tow Mode camera wasn't made available AFAIK for either HD or 1500.
Trailer 360° Surround View Kit - 82216421AB-001 (old PN) & 68527709AC (new PN)
Visionworks sells a single camera wireless kit for the 12-pin. Just keep in mind the UC displays shut off on forward motion after 8 seconds above 12MPH. So it's good for backing, but not so much for observation. Naviks has some box solutions for disabling that, as well as Tazer DT I believe.
There's also a possibility that the 12-pin surround isn't enabled in the BCM (an issue on some HD trucks) and without a working AlfaOBD or JScan on the 25's, that could be a challenge. If the surround and/or AUX2 camera buttons show up and show a blue screen, they're active.
Trailer 360° Surround View Kit - 82216421AB-001 (old PN) & 68527709AC (new PN)
Visionworks sells a single camera wireless kit for the 12-pin. Just keep in mind the UC displays shut off on forward motion after 8 seconds above 12MPH. So it's good for backing, but not so much for observation. Naviks has some box solutions for disabling that, as well as Tazer DT I believe.
There's also a possibility that the 12-pin surround isn't enabled in the BCM (an issue on some HD trucks) and without a working AlfaOBD or JScan on the 25's, that could be a challenge. If the surround and/or AUX2 camera buttons show up and show a blue screen, they're active.
I've seen the $1600 12-pin surround view camera set up from Mopar, but it still doesn't explain that 1 port referenced in my picture. Im not finding anything about what type of connection that is, how to use it, or if there are compatible cameras.
Ramboy13
Ram Guru
Ramboy13
Ram Guru
Again, this is a feed to the Digital Rear View Mirror, not the center Uconnect screen. The idea is that you put a wired camera on the back of your trailer, and your DRVM now shows what’s behind you using that camera instead of the normal one the truck. I don’t know of anyone that’s managed to get this work yet.
I told you what it is. Digital Tow Mode camera that displays on the DRVM.
It's a (coax) type connector. The camera cables are all fakra connectors, these bumper connecters are all proprietary.
Here's the old version, I don't think anyone's seen the 2025 version since it has changed.
Ah I see, Thank you! Glad RAM could make it easy and use common connectors
Genxeration
Active Member
I don’t think this input feeds to the rear-view mirror. Anyone know the part number for the camera referenced? Maybe 82216274AC?
Based on the manual - “If equipped, your vehicle is prewired for a trailer camera system.
A dedicated camera connector is located near the trailer hitch at the rear of the vehicle, typically next to the 7-pin trailer connector.
This port allows for connection to a Mopar trailer camera (sold separately), which provides a live feed from the rear of your trailer when towing. The video feed displays on your Uconnect screen and can be accessed through the Trailer Camera app.”
Based on the manual - “If equipped, your vehicle is prewired for a trailer camera system.
A dedicated camera connector is located near the trailer hitch at the rear of the vehicle, typically next to the 7-pin trailer connector.
This port allows for connection to a Mopar trailer camera (sold separately), which provides a live feed from the rear of your trailer when towing. The video feed displays on your Uconnect screen and can be accessed through the Trailer Camera app.”
Attachments
Ramboy13
Ram Guru
Read through this thread - a lot of good info about this:
Anyone know what kit I need for a trailer camera for the new 25 ram 1500 tungsten already equipped for external cameras? I already have the connection on the rear to plug in cameras. 
The coax feeds the DRVM, trust me.
No idea what camera Ram used in 2025, they've been all over the place on vendors and they all have their own proprietary digital protocols used. Since the connector changed form 2024, I expect that camera likely has as well.
That's the 12-pin.
The Coax connector feeds the DRVM.
I've tried to explain this in general basic terms.
Coax = DRVM Digital
12-pin = Trailer surround/AUX2 camera on UConnect.
