SPARK PLUG CHANGE DUE!!!!!

[busa2009]

Anyone tackled this yet? figure I would ask for pointers or tips because just looking at the motor the back ones looks like a good cursing moment...by the way im at 116k

 

[Dewey]

Buy one of these swivel sockets. Wasn’t bad at all using this. Plugs are down in there deep. This puts you just above the valve cover allowing plenty of room to get in with another swivel or even just your ratchet if you have room.

5/8" Swivel Magnetic Spark Plug Socket, 3/8" Drive x 11" Extension, 360 Degree | eBay

5/8" Swivel Magnetic Spark Plug Socket, 3/8" Drive x 11" Extension, 360 Degree Swivel, Cr-V Steel. SPECIALTY DESIGNED: Smooth 360 Degree Ball Swivel 5/8" Socket Enhanced with Magnetic & Thin Wall Design.

www.ebay.com

 

[crusher]

not bad at all, did it to my last 4th gen (2014) same thing as 5thgen

if you have a few tools including swivels youll be fine

 

[busa2009]

Found

Buy one of these swivel sockets. Wasn’t bad at all using this.

5/8" Swivel Magnetic Spark Plug Socket, 3/8" Drive x 11" Extension, 360 Degree | eBay

5/8" Swivel Magnetic Spark Plug Socket, 3/8" Drive x 11" Extension, 360 Degree Swivel, Cr-V Steel. SPECIALTY DESIGNED: Smooth 360 Degree Ball Swivel 5/8" Socket Enhanced with Magnetic & Thin Wall Design.

www.ebay.com

that won't be to long for the back ones? just making sure also did you have to take that brace off on driver side

 

[Dewey]

Found

that won't be to long for the back ones? just making sure also did you have to take that brace off on driver side

I added more info to my above post

 

[SD Rebel]

Watch this, he also has E-Torque....