rear wheel liners

[mudbog]

I was looking to get some rear wheel liners for my 2024 ram 2500 but I don't want to cover the release lever. Is there anyone that makes one that you can still access the release lever? Or is my best option to buy some and just cut out a hole to access the release lever.

 

[Richard320]

IS this for the kingpin or what? Because I am unaware of anything inside the fenderwell on my 1500. If it's something on the HD pickups, try asking over at Homepage - HD Rams

 

[mudbog]

If you look in this pic you will see on the driver side there is a rod you have to get to release the ball so you can take it out of the bed.

 

[bigdodge]

If you look in this pic you will see on the driver side there is a rod you have to get to release the ball so you can take it out of the bed.

because our 1500's would probably never use such a large hitch you will be better off on the hd forum

 

[mudbog]

It wont let me post over in the 2500hd area

 

[vincentw56]

It wont let me post over in the 2500hd area

Well, you won't probably get much help here though. You might have better luck in the Homepage - HD Rams forum. This is the 5th Gen 1500 Rams site.