Question on adaptive cruise

[Tazdual]

Hi there, my name is Ivan from Ontario. Canada have a 2024 ram sport.

Do I need to bypass the security control module when using alpha OBD foradapted cruise on my 2024 Ram ?

 

[vincentw56]

Hi there, my name is Ivan from Ontario. Canada have a 2024 ram sport.

Do I need to bypass the security control module when using alpha OBD foradapted cruise on my 2024 Ram ?

I'm not sure what you are asking. You don't need any of that to use adaptive cruise control. Are asking about adding it? If so, there is a whole how-to that explains everything you need to know in the modification section.

 

[Eighty]

Yes, you need an SGW bypass installed when making changes with AlfaOBD. If you have a Tazer, that will suffice. Otherwise, you’ll need to buy one.

 

[Tazdual]

Yes, you need an SGW bypass installed when making changes with AlfaOBD. If you have a Tazer, that will suffice. Otherwise, you’ll need to buy one.

Yes, I’m trying to add it. I do have a taser and I have the alpha OBD and I followed the steps for removing the cruise control and adding the ACC stop and go and now I have two warning lights on my dash and says ACC adaptive cruise off any help in this matter would be much appreciated.

 

[Eighty]

Yes, I’m trying to add it. I do have a taser and I have the alpha OBD and I followed the steps for removing the cruise control and adding the ACC stop and go and now I have two warning lights on my dash and says ACC adaptive cruise off any help in this matter would be much appreciated.

When I added the adaptive cruise to my truck (using AlfaOBD), it took a couple of ignition cycles for it to “take”.
If it’s been a few hours and you’ve restarted the truck several times - and it still doesn’t work, then there’s something wrong.
I don’t know anything about the Sport trim - are you sure you have all the hardware to support the adaptive cruise?

 

[Tazdual]

OK, I will try that. I am totally new. Any idea what the warning lights mean?

As for all the hardware, how do I reference as to the proper ones?

 

[Eighty]

OK, I will try that. I am totally new. Any idea what the warning lights mean?

As for all the hardware, how do I reference as to the proper ones?

The warning lights are normal right after enabling ACC (Adaptive Cruise Control). It just takes the truck a couple of on-off cycles to figure out that the hardware is there. Assuming the hardware is there. I’m not really sure how to know if your truck has the appropriate sensors. I have a TRX, which was built with all the sensors regardless of options. So I just added the steering wheel switch and enabled it with AlfaOBD. Maybe someone else can chime in as to whether the Sport trim comes with the sensors.

 

[vincentw56]

Did you add the button to the steering wheel? Did you change out the ABS/HCU module? Did you follow the guide?