5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

P26A3 - 3-Way Coolant Diverter Valve

Trout

New Member
Joined
Jun 12, 2022
Messages
1
Reaction score
0
Points
1
Age
41
Hi everybody! Long time listener, first time caller.

I have a 2020 Ecodiesel.

I'm getting the code P26A3. When searching for this code, I get a lot of the P26AB code that previous generations were getting for the coolant 3-way diverter valve. I'm having similar issues with the heater blowing cold until I stop and restart the truck.

When I look at the coolant diagrams for a 2020, the only 3-way diverter valve I see now is going to the rear axle (Part# 68309834ac). Previous gens it seems it was going to the transmission. Is this the part I should replace, or am I missing the correct one? Is this part under the airbox like previous gens? I haven't seen anyone references to this issue in forums to a 2019+ truck, so I want to be sure. I also haven't had a chance to get out and look at the truck due to the snow on the ground.

#9 below:
1739333732104.png
Thanks!
 
I believe the valve is located underneath the coolant reservoir up against the firewall on the Passenger Side on the 5th gen trucks, but that is only based on a quick look at AllData's information on my 2021. Please take that with a grain of salt.
 

Users who are viewing this thread

Members online

Back
Top