OEM sway bar end links part numbers?

[19ramsport]

Hi, does anyone know the difference in the part numbers for the oem Front sway bar end links? I'm looking to order some for my 2019 Ram.

68399868AD - is that for 2019-2020 only? but then the parts webpage has a note that says for M14 Thread, use #68399868AE. How would I know which thread it has?

when I looked up 68399868AE, it appears those are for 2021-up years?

So would the 68399868AD be the correct ones for my 2019 truck with original sway bar?

I also looked at those aftermarket ones from SuspensionMaxx. I saw some reviews/comments about them rusting and I don't want to deal with that since I live in the Northeast and aftermarket parts do tend to rust up here.

 

[Sascwatch]

The newer end links have a 21mm nut while the older have a 19mm. I think they changed the end links in 2021 and can be used on the 19-20 sway bar if you drill the holes out slightly.

I went through a few sets of the 19mm end links and bushings on my 2020. Traded it in for a 2022 and have had the bushings replaced twice and the sway bar itself replaced once. Still on the original 21mm end links, so they seem to have been beefed up.

I have a set of the suspension maxx end links and have yet to install them as the factory ones are still good.

 

[HSKR R/T]

Hi, does anyone know the difference in the part numbers for the oem Front sway bar end links? I'm looking to order some for my 2019 Ram.

68399868AD - is that for 2019-2020 only? but then the parts webpage has a note that says for M14 Thread, use #68399868AE. How would I know which thread it has?

when I looked up 68399868AE, it appears those are for 2021-up years?

So would the 68399868AD be the correct ones for my 2019 truck with original sway bar?

I also looked at those aftermarket ones from SuspensionMaxx. I saw some reviews/comments about them rusting and I don't want to deal with that since I live in the Northeast and aftermarket parts do tend to rust up here.

Factory parts will rust just as easily if not cared for.

 

[19ramsport]

Update, I decided to buy the SuspensionMaxx end links instead of OEM. I installed them and so far my clunking sounds are gone. I could tell the grease was leaking out of the OEM end link boots.