5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

No heat issue

Garrett798

New Member
Joined
Dec 24, 2024
Messages
1
Reaction score
0
Points
1
Age
33
I have 21 RAM 3500 6.7 with around 95,000 miles on it and i noticed that the driver side heat is much cooler than the passenger side with the heat on high. I have seen many things on blend doors and blend door actuators on older models of this truck but haven't found anything on a 5th gen. If it is just the actuator, can it be changed without pulling the whole dash, and is there a way to identify what the problem actually is?
 
I have 21 RAM 3500 6.7 with around 95,000 miles on it and i noticed that the driver side heat is much cooler than the passenger side with the heat on high. I have seen many things on blend doors and blend door actuators on older models of this truck but haven't found anything on a 5th gen. If it is just the actuator, can it be changed without pulling the whole dash, and is there a way to identify what the problem actually is?
You might have better luck in the Homepage - HD Rams forum. This is the 5th Gen 1500 Rams site.
 
It is a heated core. You can back flush with a garden hose to get heat working again.
 

Users who are viewing this thread

  • Back
    Top