5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Let’s see those Audio Setups!

Apettit13

Active Member
Joined
Oct 6, 2020
Messages
93
Reaction score
92
Points
18
Age
29
Hey all,

I am a bit of an audiophile, every vehicle I have owned since I was 16 has had some sort of sound system, and my ram will be the same.

I’m just looking to see who has a system setup, what components you’re using, and how you like it?

The setup I’ve been looking at is Kenwood Speakers throughout, Rockford Fosgate 10” P3 Punch Subs, and a hifonics 1200W Brutus amp.

I absolutely love Rockford fosgate, the bass is heavy, while still maintaining a tight crisp punch, I have also considered a JL audio stealth box.

Let me know what everyone is working with!
 
I'm also interested to see what people have done. I have done nothing audiowise to mine yet.
 
My truck came with the 8.4" non nav alpine system so I went with the Rockford Fosgate DSR1 for stock integration. For the door speakers I went with Skar Audio FSX65-4 for the fronts and Kicker 46CSC9634 for rear. In the dash corners and rear headliners I put PRV TW350TI-4. And I made a custom box for a Kicker 46L7T124. The doors are powered with a Crunch PX1000.4 and the PRV's and sub is powered with a Pioneer GM-D9705.
 
My truck came with the 8.4" non nav alpine system so I went with the Rockford Fosgate DSR1 for stock integration. For the door speakers I went with Skar Audio FSX65-4 for the fronts and Kicker 46CSC9634 for rear. In the dash corners and rear headliners I put PRV TW350TI-4. And I made a custom box for a Kicker 46L7T124. The doors are powered with a Crunch PX1000.4 and the PRV's and sub is powered with a Pioneer GM-D9705.
I just put in Kicker door speakers and tweeters. Looking to add a 10 Inch Fosgate P3 soon as well
 
I just put in Kicker door speakers and tweeters. Looking to add a 10 Inch Fosgate P3 soon as well

Down the road, I plan to swap out the amps to 2 Massive Audio EX5 amps and go with 2 10" Skar Audio SVR-10D4. I like how the single 12" sounds but I think I need more low end power. It should be what I'm looking for, 1600 watts rms instead of 600 watts rms.
 
I just changed my HK speakers out to infinity reference ones and added a custom sub box with 3 10’s. Used pac amppro for integration.
 
I just changed my HK speakers out to infinity reference ones and added a custom sub box with 3 10’s. Used pac amppro for integration.

I had Infinity reference speakers in the doors and dash previously, but after I amplified everything, they all eventually blew out lol.
 
I had Infinity reference speakers in the doors and dash previously, but after I amplified everything, they all eventually blew out lol.
Lol I’ve done that several times. Trying to get the amp tuned in just right and I pushed the door speakers a little too hard.
 
Lol I’ve done that several times. Trying to get the amp tuned in just right and I pushed the door speakers a little too hard.

Yeah that's what happened lol. I had them wired to the Pioneer amp, rated wattage @ 4 ohm is 75 and 2 ohm is 100. So I figured it would be about 80 watts for the Infinity's since they're in between but somehow they still couldn't take it.
 
Yeah that's what happened lol. I had them wired to the Pioneer amp, rated wattage @ 4 ohm is 75 and 2 ohm is 100. So I figured it would be about 80 watts for the Infinity's since they're in between but somehow they still couldn't take it.
Yeah I would upgrade them if I ever planned to amp them any additionally. As of now they are a good balance for the bass I have to me
 
20201122_231752.jpgI just installed Infinity Kappa in front doors and Reference in rear and dash. PAC AP4-CH41 with Kicker Amps subs and Fox enclosure
 
Last edited:
I got my new Skar Audio SVR-10D2's in. It's gonna be a while till I install everything, especially because I am going to make my own box. I didn't like what was available either.
 

Attachments

  • 20201130_145516.jpg
    20201130_145516.jpg
    121 KB · Views: 24

Users who are viewing this thread

Back
Top