So after a couple of calls to Superchips I got my Flashpaq installed on my 2019 non e-torque. When I first installed the PCM they sent, the truck came on for 3 seconds then shut off. Checked all my connections and same thing. Then on the third try got nothing, not even a turn over. So kinda freaking out I reinstalled original PCM and everything worked fine. Called Superchips and the guy walked me through first uploading my factory PCM onto the programmer then I swapped PCM's and uploaded my PCM file from the programmer back onto the PCM they mailed me. Worked like a charm. The OBD module was the hardest thing for me to find way up there under the emergency brake. Thanks for the great support at Superchips!! So I just filled up with 91 so I'll run that mode and let you know how the seat of the pants feel is. Thursday get my Pgp caliper covers on along with Helig sway bar and 2" leveling springs for the back....when will it end!!!!