My question is what would be a good trailer gain setting for the boat I will be towing which is a vintage Chris -Craft wood inboard and boat and is about 3000 lbs with full tank
of fuel, trailer is comes in 1,400 lbs empty with two axles with a GAWR 3500 each and a GVWR OF 7,000 LBS, also what trailer type would this be light or heavy electric it has
second question if towing trailer empty what is a good rule of thumb ,I had the dealer install and program factory brake controller since trailer has electric brakes but did not
see information on trailer type or gain setting in owner manual.
Third question the 10 % trailer tongue that they want how is this figure done?
of fuel, trailer is comes in 1,400 lbs empty with two axles with a GAWR 3500 each and a GVWR OF 7,000 LBS, also what trailer type would this be light or heavy electric it has
second question if towing trailer empty what is a good rule of thumb ,I had the dealer install and program factory brake controller since trailer has electric brakes but did not
see information on trailer type or gain setting in owner manual.
Third question the 10 % trailer tongue that they want how is this figure done?
