5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Gear Selector Issue

cubfan4life23

New Member
Joined
Feb 4, 2021
Messages
1
Reaction score
0
Points
1
Age
51
When I started the truck this morning, all of the lights on the gear selector panel stayed lit. They never turned off while driving. I pushed and tried to change into 2WD and nothing happened. And when I shut the truck down, they stayed lit but faded slightly.

Any ideas?

I was able to drive to work.

It was also -5 degrees.. so not sure if this is having an impact on something as well.
 

Attachments

  • IMG_4867.jpg
    IMG_4867.jpg
    94.9 KB · Views: 12
  • IMG_4868.jpg
    IMG_4868.jpg
    112.4 KB · Views: 12
When I started the truck this morning, all of the lights on the gear selector panel stayed lit. They never turned off while driving. I pushed and tried to change into 2WD and nothing happened. And when I shut the truck down, they stayed lit but faded slightly.

Any ideas?

I was able to drive to work.

It was also -5 degrees.. so not sure if this is having an impact on something as well.
Automotive design temp. range is -40 to +105 F. Passenger compartment.
Should not have done that due to temperature unless something is not up to par.
Maybe someone else has seen this and has an idea of what might be causing it.
 

Users who are viewing this thread

Back
Top