5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Gas gauge not reading full

vinnieloo

Active Member
Joined
Jun 6, 2020
Messages
192
Reaction score
154
Points
43
Location
Upstate NY
Hey everyone,
Just seeing if anyone has encountered the gas gauge not reading full. Filled until pump auto stop. Just below full. Added 0.5 gal and still reading just less than full. 5.7l ET with 23 gal tank.

Thanks,
 
Hey everyone,
Just seeing if anyone has encountered the gas gauge not reading full. Filled until pump auto stop. Just below full. Added 0.5 gal and still reading just less than full. 5.7l ET with 23 gal tank.

Thanks,
Had the same issue, would auto stop with maybe a few gallons still until full. With these new trucks you really have to shove the nozzle into the filler hole more than you would a typical vehicle. Once I figured that out always filled up full.
 
Hey Everybody. I filled up my 2019 Ram Big Horn DT tonight and the gas gauge stopped just below the half-way mark. Any ideas as to what could be wrong? Is there a way to reset the gas gauge? Thanks.
 
What’s up guys. So I went into work not knowing my truck was still on and it had been running pretty much all day. Went from 315 miles to 145. Stopped to put more gas in it and I’m pretty sure it’s reading the fuel level wrong. Did I basically mess up the sensor?
 

Users who are viewing this thread

Back
Top