Farctory subwoofer integration on 6 speaker standard sound system

[sppb32]

For does who want to integrate a factory subwoofer on the standard sound system i was able to rewire it to be used with a aftermarket amplifier, since it is very close to a 10" triple 2 ohm voice coil it can only be wired to a 6 ohm or 0.6 ohm load, some class D amplifiers are ok running at .6 ohm but i suggest a 2 channel bridged running at 6 ohm, it actually sound pretty good and i would say a 200 watt amplifier will be adequate to power it