5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

EcoDiesel 2019+ 3-D Printed Dust Cap

Malodave

Ram Guru
Joined
Oct 4, 2020
Messages
1,113
Reaction score
604
Location
Rindge NH
I just printed Some Dust Caps for my 2021 EcoDiesel. I used a Gray
ABS like Resin. I still need to sand the top, paint it green, then color
fill the Lettering. There is space to install a screw in Magnet. It uses
a 4mm X 37mm O-ring to seal. This requires you to remove the top
1/4" or so of the internal ribs on the Filler Neck. Will update Post
after Finishing is complete.

Malodave

EcoDieselFillerCap-1.jpg



EcoDieselFillerCap-2.jpg



EcoDieselFillerCap-3.jpg
 

Malodave

Ram Guru
Joined
Oct 4, 2020
Messages
1,113
Reaction score
604
Location
Rindge NH
Looks great! Are you selling them?
I am still trying to find where I put the Magnets. I have the Three
painted green with the Oring and White Color infill of the Lettering.
Then I can figure out a Price with Shipping. I also have to find out if a Bubble
Envelope is cheaper than the $9 for Priority Flat Rate.

I have already sold a few of the Sunglass Cubby Switch Panel. I can also
make the DXF and STL files available if someone wants to Print their own.


Malodave

ETA for Pic

If anyone wants the DXF and STL file to print their own, PM me with a Regular Email Address.

DieselCap8-4.jpg
 
Last edited:

Users who are viewing this thread

Top