5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Diode Dynamics

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
358
Reaction score
545
Location
Gilbert Arizona
We are now a Diode Dynamics Dealer. Large quantities of laser cut metal has been shipped to us so we will be working on getting all of our products back in stock over the next several weeks. Check out these Diode Dynamics SS3 Pod lights! They go great with our ditch light brackets and will go great with a few more brackets we are looking at releasing soon.

IMG_9995.jpg IMG_9996.jpg IMG_9997.jpg
 

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
358
Reaction score
545
Location
Gilbert Arizona
Any details on the other brackets you are releasing?
I'm working on brackets to mount rear facing backup lights to fit between the rear tow hooks on our 5th gen rear tow hook brackets and the TRX. Also working on brackets to mount rear facing dust lights at the top of the bed near the cab. I'm playing around with a prerunner style bar to mount light pods or bars on the front bumper without drilling into the bumper. Also open to ideas for other light bar or light pod mounting options.
 

RebelWraith

Polymath
Site Supporter
Joined
May 3, 2019
Messages
751
Reaction score
620
Location
Montclair, Va.
I'm working on brackets to mount rear facing backup lights to fit between the rear tow hooks on our 5th gen rear tow hook brackets and the TRX. Also working on brackets to mount rear facing dust lights at the top of the bed near the cab. I'm playing around with a prerunner style bar to mount light pods or bars on the front bumper without drilling into the bumper. Also open to ideas for other light bar or light pod mounting options.
I'm VERY interested in the dust/chase lights but most of those mount to the inside of the bed and I have a hard fold tonneau cover that gets in the way. Was hoping someone would make something like I've installed on some Toyota trucks that mounts by the tailgate. They make these for driver and passenger side of the bed.
image_1024x1024_fe51de97-f2ec-49c3-b3b0-61ad1da15136.jpg
 
Last edited:

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
358
Reaction score
545
Location
Gilbert Arizona
I'm VERY interested in the dust/chase lights but most of those mount to the inside of the bed and I have a hard fold tonneau cover that gets in the way. Was hoping someone would make something like I've installed on some Toyota trucks that mounts by the tailgate. They make these for driver and passenger side of the bed.
View attachment 116506
Do you have more pictures of those? I like the way you think. I'd like to make a few offerings for this.
 

RebelWraith

Polymath
Site Supporter
Joined
May 3, 2019
Messages
751
Reaction score
620
Location
Montclair, Va.

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
358
Reaction score
545
Location
Gilbert Arizona
It sucks not having my Rebel to prototype stuff on. I have to reach out to friends and customers to see if one can leave one with me. We will look at that option for sure though.
 

Mclovinnnnn

Ram Guru
Joined
Jun 14, 2018
Messages
584
Reaction score
644
Location
San Diego
I'm VERY interested in the dust/chase lights but most of those mount to the inside of the bed and I have a hard fold tonneau cover that gets in the way. Was hoping someone would make something like I've installed on some Toyota trucks that mounts by the tailgate. They make these for driver and passenger side of the bed.
View attachment 116506
What about mounting the brackets to the outside of the bed, like the space in between the bed and the cab? In my mind literally a straight piece of flat metal could bolt to the bed and then the mounts that come on most lights could bolt right to that piece of flat steel? Or if the ubracket that comes with the light can’t rotate all the way then do a flat piece of steel and then on the very top make a 90* angle for the light’s mount to sit/bolt right on
 

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
358
Reaction score
545
Location
Gilbert Arizona
What about mounting the brackets to the outside of the bed, like the space in between the bed and the cab? In my mind literally a straight piece of flat metal could bolt to the bed and then the mounts that come on most lights could bolt right to that piece of flat steel? Or if the ubracket that comes with the light can’t rotate all the way then do a flat piece of steel and then on the very top make a 90* angle for the light’s mount to sit/bolt right on
That is one I plan on doing. I am thinking the 90 degree bracket because the bend adds a slight bit of rigidity. I also figured it would be nice to make something that works for people running bed covers
 

Users who are viewing this thread

Top